Unit of competency Outline

Date retreived
23/07/2026 12:58 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Use earthmoving and off-the-road tyre handlers

Use earthmoving and off-the-road tyre handlers

Unit of competency
National Code
AURKTJ006
State Code
WI788
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
2.00
Current Release Date
16/01/2015
View on TGA
State Implementation and Classification
Approved Date
01/07/2014
Field of Education
030503 - Vehicle Mechanics
Original Release Date
01/07/2014
Nominal Hours
20
Description
This unit describes the performance outcomes required to use an earthmoving and off-the-road (OTR) tyre handler. It includes checking the tyre handler and work site for suitability, operating the tyre handler, and completing work according to operational requirements.It applies to those who fit earthmoving and OTR tyres, wheels and rim assemblies of not less than 600 mm (24 inches) nominal diameter.Earthmoving and OTR tyre handlers must be operated in compliance with the licence requirements and regulations of the relevant state or territory authority. Licensing, legislative, regulatory or certification requirements may apply to this unit in some jurisdictions. Users are advised to check with the relevant regulatory authority.
Notes
Elements and Performance Criteria
1. Check tyre handler and work site for suitability
  • 1.1 Work site is selected for operations
  • 1.2 Work area is checked for obstructions and proximity to vehicles and equipment
  • 1.3 Barriers and warning signs are erected in areas where there may be passing traffic
  • 1.3 Specialist equipment and tools are selected
  • 1.4 Tyre handler is inspected for serviceability and compliance with relevant Australian standards
2. Operate tyre handler
  • 2.1 Tyre handler pre-operational checks are conducted, and any operating hazards identified and addressed
  • 2.2 Tyre handler, and specialist equipment and tools are operated within safe working limits and to maximise efficiency of operations
  • 2.3 Tyres, wheels and rim assemblies are handled according to workplace procedures and Australian standards
3. Complete work processes
  • 2.4 Barriers and warning signs are removed and stored
  • 2.5 Tyre handler, and specialist equipment and tools are returned to appropriate storage or parking area
  • 2.6 Documentation is completed, reporting any damage or faults
No information
No information
Replaced By
State Code National Code Title Type
OAK29 AURKTJ016 Use earthmoving and off-the-road tyre handlers Unit of competency