Elements and Performance Criteria

RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
OHS requirements:
are to be in line with applicable Commonwealth, State or Territory legislation and regulations, and organisational safety policies and procedures, and may include:
personal protective equipment and clothing
safety equipment
first aid equipment
fire fighting equipment
hazard and risk control
fatigue management
elimination of hazardous materials and substances
safe forest practices including required actions relating to forest fire
manual handling including shifting, lifting and carrying
machine isolation and guarding
Environmental requirements may include:
legislation
organisational policies and procedures
workplace practices
Legislative requirements:
are to be in line with applicable Commonwealth, State or Territory legislation, regulations, certification requirements and codes of practice and may include:
award and enterprise agreements
industrial relations
Australian Standards
confidentiality and privacy
OHS
the environment
equal opportunity
anti-discrimination
relevant industry codes of practice
duty of care
Organisational requirements may include:
legal
organisational and site guidelines
policies and procedures relating to own role and responsibility
quality assurance
procedural manuals
quality and continuous improvement processes and standards
OHS, emergency and evacuation procedures
ethical standards
recording and reporting requirements
equipment use and maintenance and storage requirements
environmental management requirements (waste minimisation and disposal, recycling and re-use guidelines)
Flitch
is a large piece of sawn log section cut longitudinally, sawn on at least two surfaces at ninety degrees and intended for further cutting
Cant
is a thick piece of timber with two or more surfaces cut longitudinally on the angle (obliquely) sawn from a log section and intended for further sawing
Work order is to include:
instructions for the sawing logs and despatch of flitches or cants from the work site to down-stream processing
and may include:
treating
species
size
length
quantity
grade
instructions for the environmental monitoring of work and procedures
environmental care requirements relevant to the work
Appropriate personnel may include:
supervisors
suppliers
clients
colleagues
managers
Equipment may include:
circular saws
bench saws
overhead frame saws or band saws (single, twin, single edges and twin edges)
mechanical feed
conveyors
standard three headed dog carriages
flat top carriages with head rigs
and is to include:
procedures for machine lock-out such as protecting operators and co-workers from accidental injury by isolating the machine from the power source
Optimising includes:
planning the cutting of a log to achieve the most from it
ensuring environmental requirements are central to this planning process
Communication may include:
verbal and non-verbal language
constructive feedback
active listening
questioning to clarify and confirm understanding
use of positive, confident and cooperative language
use of language and concepts appropriate to individual social and cultural differences
control of tone of voice
body language
Pre start-up checks
are conducted to ensure:
saw has been set-up correctly
blades are installed accurately
machinery is operating to optimum performance
Log sections
are large sections and lengths of timber available for further processing as a result of breaking down logs
Dogs
are the carriage devices which support logs during break down
Feed rate is to include:
rate of speed the material is passed through the machine affecting the sharpness of the blades
finish of the material
production output
Defects may include:
defects arising from a change in moisture content
warp
wane
curvature
shakes
insect defects
knots and resin pockets
sweep
taper
end splits
shape
Disposing of may include:
recycling timber sections with defects and sawn edges
re-using timber sections with defects and sawn edges
Records and reports may include:
the sawing procedures
product type
size
inspection
grading and labelling outcomes
storage locations
quality outcomes
hazards
incidents
equipment malfunctions
and may be:
manual
using a computer-based system other appropriate organisational communication system
Dealing with may include:
repair of damaged saws and blunt or damaged saw blades
disposing of saws and saw blades that cannot be repaired

EVIDENCE GUIDE
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
A person who demonstrates competency in this unit must be able to provide evidence that they can safely and efficiently saw flitches and cants within organisational requirements
Critical aspects for assessment and evidence required to demonstrate competency in this unit
The evidence required to demonstrate competency in this unit must be relevant to, and satisfy, all of the requirements of the elements of this unit and include demonstration of:
following applicable Commonwealth, State or Territory legislative and regulatory requirements and codes of practice relevant to sawing flitches and cants
following organisational policies and procedures relevant to sawing flitches and cants
sawing log sections to produce flitches and cants in line with the work order and within prescribed organisational specifications
conducting operator maintenance on saw machinery
Context of and specific resources for assessment
Competency is to be assessed in the workplace or realistically simulated workplace
Assessment is to occur under standard and authorised work practices, safety requirements and environmental constraints
Assessment of required knowledge, other than confirmatory questions, will usually be conducted in an off-site context
Assessment is to follow relevant regulatory or Australian Standards requirements
The following resources should be made available:
workplace location or simulated workplace
materials and equipment relevant to undertaking work applicable to this unit
specifications and work instructions
Method of assessment
Assessment must satisfy the endorsed Assessment Guidelines of the FPI11 Training Package
Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with application of required knowledge
Assessment must be by direct observation of tasks, with questioning on required knowledge and it must also reinforce the integration of employability skills
Assessment methods must confirm the ability to access and correctly interpret and apply the required knowledge
Assessment may be applied under project-related conditions (real or simulated) and require evidence of process
Assessment must confirm a reasonable inference that competency is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances
Assessment may be in conjunction with assessment of other units of competency
The assessment environment should not disadvantage the candidate
Assessment practices should take into account any relevant language or cultural issues related to Aboriginality, gender or language backgrounds other than English
Where the participant has a disability, reasonable adjustment may be applied during assessment
Language and literacy demands of the assessment task should not be higher than those of the work role