Unit of competency Outline

Date retreived
22/07/2026 9:53 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Operate and monitor an internal combustion dual fuel reciprocating engine

Operate and monitor an internal combustion dual fuel reciprocating engine

Unit of competency
National Code
UEPOPS248
State Code
OAH24
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
31/10/2018
State Implementation and Classification
Approved Date
15/05/2019
Field of Education
030717 - Plant And Machine Operations
Original Release Date
15/05/2019
Nominal Hours
36
Description
This unit involves the skills and knowledge required to operate, inspect and monitor internal combustion dual fuel reciprocating engines.Typically, internal combustion dual fuel reciprocating engines are fed with fossil fuels such aspetrol, gas, diesel oroil. Internal combustion dual fuel reciprocating engines in the form ofcombustion turbines drive the largest electric generators. Competency in this unit requires the ability to plan work, operate internal combustion dual fuel reciprocating engine plant, change fuel type during operation, test internal combustion dual fuel reciprocating engine plant operations, analyse internal combustion dual fuel reciprocating engine plant faults, monitor and inspect internal combustion dual fuel reciprocating engine plant and the completion of all documentation. Individuals will, in general, work under supervision, in a power generating facility as an operator. Power generation plant operators are typically trained and authorised to isolate, prepare plant and issue permits to work.No licensing, legislative or certification requirements apply to this unit at the time of publication.Note: Workplace practiceThe application of the skills and knowledge described in this unit may require a licence or training permit to practice in the workplace where work is carried out on gas and electrical installations. Additional conditions may apply under state and territory legislative and regulatory licensing requirements.
Notes
Elements and Performance Criteria
1 Plan and prepare work
  • 1.1 Safety issues related to operating and monitoring internal combustion dual fuel reciprocating engines are identified, in accordance with workplace procedures and Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) regulations and legislative requirements
  • 1.2 Work requirements are identified, in accordance with workplace procedures, from appropriate personnel and documentation
  • 1.3 Documentation to determine internal combustion dual fuel reciprocating engine plant status is assessed and evaluated, in accordance with workplace procedures
  • 1.4 Inspection and field preparations for internal combustion dual fuel reciprocating engine plant service are carried out, in accordance with workplace procedures and manufacturers' recommendations
  • 1.5 Internal combustion dual fuel reciprocating engine plant operational prerequisites are established, in accordance with workplace procedures and manufacturers' recommendations
  • 1.6 Sequence for recommissioning of internal combustion dual fuel reciprocating engine plant is determined, in accordance with workplace procedures and site requirements
2 Operate internal combustion dual fuel reciprocating engineplant
  • 2.1 Internal combustion dual fuel reciprocating engine plant is operated, in accordance with workplace procedures and manufacturers' operating recommendations
  • 2.2 Internal combustion dual fuel reciprocating engine plant is monitored and observed, in accordance with workplace procedures, to detect deviations from normal operating conditions
  • 2.3 Corrective actions are taken to rectify internal combustion dual fuel reciprocating engine plant abnormalities, in accordance with workplace procedures and manufacturers' recommendations
3 Change fuel type during operation
  • 3.1 Changeover of fuel type is monitored and observed, in accordance with workplace procedures, to detect deviations from expected results
  • 3.2 Corrective actions are taken, in accordance with workplace procedures and manufacturers' recommendations
4 Test internal combustion dual fuel reciprocating engineplant operation
  • 4.1 Operational tests are performed, in accordance with workplace procedures
  • 4.2 Internal combustion dual fuel reciprocating engine plant is observed, in accordance with workplace procedures, for correct operational response
  • 4.3 Corrective action is taken, in accordance with workplace procedures, when response does not meet with documentation, plant integrity or personnel safety requirements
  • 4.4 Appropriate personnel are notified, in accordance with workplace procedures, when defects are detected
5 Analyse internal combustion dual fuel reciprocating engineplant faults
  • 5.1 Cause of abnormal internal combustion dual fuel reciprocating engine plant operating conditions are identified, in accordance with workplace procedures, by analysing technical and operational information
  • 5.2 Corrective action is taken, in accordance with workplace procedures
  • 5.3 Internal combustion dual fuel reciprocating engine plant integrity and personnel safety is maintained, in accordance with workplace procedures, and in consultation with appropriate personnel and technical and operational documentation
6 Monitor and inspect internal combustion dual fuel reciprocating engineplant
  • 6.1 Internal combustion dual fuel reciprocating engine plant to be monitored and inspected is physically identified, in accordance with workplace procedures
  • 6.2 Internal combustion dual fuel reciprocating engine plant is monitored and inspected for normal operation or to detect deviations, in accordance with workplace procedures
  • 6.3 Corrective action is taken, in accordance with workplace procedures
  • 6.4 Appropriate personnel are notified, in accordance with workplace procedures, when defects are detected
7 Complete documentation
  • 7.1 Internal combustion dual fuel reciprocating engine plant problems, abnormalities and status are reported in accordance with workplace procedures
  • 7.2 Documentation is updated, in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WE322 UEPOPS248B Operate and monitor an internal combustion dual fuel reciprocating engine Unit of competency
Replaced By
State Code National Code Title Type
ODY78 UEPOPS078 Operate and monitor an internal combustion dual fuel reciprocating engine Unit of competency
State Code National Code Title Type
BEB9 UEP20118 Certificate II in ESI Generation - Operations Support Qualification