Unit of competency Outline

Date retreived
22/07/2026 8:36 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Conduct site inspections

Conduct site inspections

Unit of competency
National Code
AHCWRK311A
State Code
D7317
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
10/06/2011
View on TGA
State Implementation and Classification
Approved Date
04/07/2014
Field of Education
050999 - Environmental Studies, N.e.c.
Original Release Date
04/07/2014
Nominal Hours
35
Description
This unit covers the process of undertaking a site inspection and defines the standard required to: verify details of the location, ownership, orientation and boundaries of a site; perform hazard identification and risk control procedures; observe and record site information details and features; inspect vegetation and soil types, health, condition and location; carry out a site inspection; develop and document a site inspection report and/or a base plan.
Notes
Elements and Performance Criteria
1. Collect information
  • 1.1. Site location and relevant details are provided or acquired.
  • 1.2. Site maps and plans are sourced where available and reviewed.
  • 1.3. Scope of inspection is identified in line with client-stakeholder needs and local regulations.
  • 1.4. Climate and weather conditions are ascertained from historical data.
  • 1.5. Where required, formal approval is sought to visit site.
  • 1.6. Covenants are identified and recorded.
  • 1.7. Remote sensing systems are checked for status.
2. Prepare for a site visit
  • 2.1. All requirements for inspection are identified and prepared.
  • 2.2. Methods and forms for recording inspection are planned and available for use.
  • 2.3. Scope of proposed work is evaluated and field notes prepared to checklist specific concerns.
  • 2.4. Environmental conditions are evaluated in preparation for likely site conditions.
  • 2.5. Traffic management requirements are considered where required.
3. Conduct site inspection
  • 3.1. Site orientation is undertaken and ownership and site boundaries are verified.
  • 3.2. Site hazards for a site inspection are identified, risk assessed and appropriate controls implemented.
  • 3.3. Site dimensions and gradients are identified, estimated and recorded.
  • 3.4. Soil types are identified from soil identification reference chart guidelines.
  • 3.5. Soil samples are field tested and detailed notes recorded for analysis of potential problems.
  • 3.6. Relevant vegetation is inspected to determine the identity, health, condition and location.
  • 3.7. Observable signs of fauna are investigated.
  • 3.8. Existing on-site services and adjacent site features are identified and recorded.
4. Document information
  • 4.1. Base plan is prepared of the site.
  • 4.2. Site inspection information is documented in an inspection/site inventory report and/or on the base plan.
  • 4.3. Documents are completed and forwarded to client/supervisor/manager.
RANGE STATEMENT
The range statement relates to the unit of competency as a whole.
Features may include:
soils
topography
vegetation
hydrology
services above and below ground
amenities, buildings and structures
access points
site modifications
fauna
location of boundaries
aspect
watercourses and paths and all vegetation forms
plants
their botanical and common names
age
health
types of defects
problems and conditions.
Site inspections may include:
those conducted in all areas of urban and regional settings such as residential areas and public open spaces.
EVIDENCE GUIDE
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment

Critical aspects for assessment and evidence required to demonstrate competency in this unit
The evidence required to demonstrate competency in this unit must be relevant to workplace operations and satisfy holistically all of the requirements of the performance criteria and required skills and knowledge and include achievement of the following:
verify details of the location, ownership, orientation and boundaries of a site
perform hazard identification and risk control procedures
observe and record site information details and features
inspect vegetation and soil types, health, condition and location
carry out a site inspection
develop and document a site inspection report and/or a base plan.
Context of and specific resources for assessment
Competency requires the application of work practices under work conditions. Selection and use of resources for some worksites may differ due to the regional or enterprise circumstances.
Replaces
State Code National Code Title Type
S2749 RTC3218A Undertake a site assessment Unit of competency
Replaced By
State Code National Code Title Type
BAM72 AHCWRK311 Conduct site inspections Unit of competency