Unit of competency Outline
Date retreived
23/07/2026 5:16 AM AWST
23/07/2026 5:16 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Render edible products
Render edible products
Unit of competency
National Code
MTMP3089C
MTMP3089C
State Code
D8970
D8970
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
Field of Education
030307 - Food Processing Technology
Original Release Date
Nominal Hours
20
Description
This unit covers the skills and knowledge required to operate rendering equipment and produce an edible product.
Notes
Elements and Performance Criteria
1. Prepare and maintain equipment
- 1.1. Pre-operational checks are performed in accordance with workplace, Occupational Health and Safety (OH&S) and hygiene and sanitation requirements.
- 1.2. Routine maintenance is performed in accordance with workplace requirements.
2. Monitor and control flow of raw materials
- 2.1. Nature and quality of the raw materials is monitored to ensure compliance with workplace and regulatory requirements.
- 2.2. Defects in raw materials are reported promptly and corrective action taken promptly in accordance with workplace requirements.
- 2.3. Flow of raw materials into bulk bins and/or the processing equipment is controlled in accordance with work instructions.
3. Render edible product
- 3.1. Equipment is operated in accordance with workplace regulations, OH&S requirements and manufacturer's specifications.
- 3.2. Edible product is rendered to workplace and customer specifications.
- 3.3. Routine monitoring, record keeping and sampling is performed to ensure compliance with product specifications.
- 3.4. Sources of potential contamination of the product are identified and preventative and corrective measures are taken in accordance with work instructions.
- 3.5. Cleanliness of work area is maintained in accordance with workplace requirements.
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Workplace requirements may include:
enterprise-specific requirements
OH&S requirements
hygiene and sanitation requirements
Quality Assurance (QA) requirements
Standard Operating Procedures (SOPs)
the ability to perform the task to production requirements
work instructions.
OH&S requirements may include:
enterprise OH&S policies, procedures and programs
OH&S legal requirements
Personal Protective Equipment (PPE) which may include:
coats and aprons
ear plugs or muffs
eye and facial protection
head-wear
lifting assistance
mesh aprons
protective boot covers
protective hand and arm covering
protective head and hair covering
uniforms
waterproof clothing
work, safety or waterproof footwear
requirements set out in standards and codes of practice.
Hygiene and sanitation requirements may include:
relevant government regulations
workplace requirements.
Regulatory requirements may include:
Export Control Act
relevant Australian Standards
relevant regulations
requirements set out in AS 5008-2001/Amdt 1-2003 Australian Standard for the Hygienic Rendering of Animal Products.
Communication skills may include:
applying numeracy skills to workplace requirements
listening and understanding
reading and interpreting workplace documentation
sharing information
speaking clearly and directly.
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Workplace requirements may include:
enterprise-specific requirements
OH&S requirements
hygiene and sanitation requirements
Quality Assurance (QA) requirements
Standard Operating Procedures (SOPs)
the ability to perform the task to production requirements
work instructions.
OH&S requirements may include:
enterprise OH&S policies, procedures and programs
OH&S legal requirements
Personal Protective Equipment (PPE) which may include:
coats and aprons
ear plugs or muffs
eye and facial protection
head-wear
lifting assistance
mesh aprons
protective boot covers
protective hand and arm covering
protective head and hair covering
uniforms
waterproof clothing
work, safety or waterproof footwear
requirements set out in standards and codes of practice.
Hygiene and sanitation requirements may include:
relevant government regulations
workplace requirements.
Regulatory requirements may include:
Export Control Act
relevant Australian Standards
relevant regulations
requirements set out in AS 5008-2001/Amdt 1-2003 Australian Standard for the Hygienic Rendering of Animal Products.
Communication skills may include:
applying numeracy skills to workplace requirements
listening and understanding
reading and interpreting workplace documentation
sharing information
speaking clearly and directly.
EVIDENCE GUIDE
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
The meat industry has specific and clear requirements for evidence. A minimum of three forms of evidence is required to demonstrate competency in the meat industry. This is specifically designed to provide evidence that covers the demonstration in the workplace of all aspects of competency over time.
These requirements are in addition to the requirements for valid, current, authentic and sufficient evidence.
Three forms of evidence means three different kinds of evidence - not three pieces of the same kind. In practice it will mean that most of the unit is covered twice. This increases the legitimacy of the evidence.
All assessment must be conducted against Australian meat industry standards and regulations.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Competency must be demonstrated over a period of time and at a relevant rate of production.
Context of, and specific resources for assessment
Assessment must be conducted using meat prepared to a specification.
Method of assessment
Recommended methods of assessment include:
quiz of underpinning knowledge
workplace demonstration
workplace referee or third-party report of performance over time.
Assessment practices should take into account any relevant language or cultural issues related to Aboriginality or Torres Strait Islander, gender, or language backgrounds other than English. Language and literacy demands of the assessment task should not be higher than those of the work role.
Guidance information for assessment
A current list of resources for this Unit of Competency is available from MINTRAC www.mintrac.com.au or telephone 1800 817 462.
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
The meat industry has specific and clear requirements for evidence. A minimum of three forms of evidence is required to demonstrate competency in the meat industry. This is specifically designed to provide evidence that covers the demonstration in the workplace of all aspects of competency over time.
These requirements are in addition to the requirements for valid, current, authentic and sufficient evidence.
Three forms of evidence means three different kinds of evidence - not three pieces of the same kind. In practice it will mean that most of the unit is covered twice. This increases the legitimacy of the evidence.
All assessment must be conducted against Australian meat industry standards and regulations.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Competency must be demonstrated over a period of time and at a relevant rate of production.
Context of, and specific resources for assessment
Assessment must be conducted using meat prepared to a specification.
Method of assessment
Recommended methods of assessment include:
quiz of underpinning knowledge
workplace demonstration
workplace referee or third-party report of performance over time.
Assessment practices should take into account any relevant language or cultural issues related to Aboriginality or Torres Strait Islander, gender, or language backgrounds other than English. Language and literacy demands of the assessment task should not be higher than those of the work role.
Guidance information for assessment
A current list of resources for this Unit of Competency is available from MINTRAC www.mintrac.com.au or telephone 1800 817 462.
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| BAY77 | AMPA3090 | Render edible products | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| D604 | MTM30611 | Certificate III in Meat Processing (General) | Qualification |
| D602 | MTM30411 | Certificate III in Meat Processing (Rendering) | Qualification |