Unit of competency Outline

Date retreived
22/07/2026 6:28 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Assist in seamanship operations

Assist in seamanship operations

Unit of competency
National Code
DEFSEA001
State Code
AVP53
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
22/10/2015
State Implementation and Classification
Approved Date
05/08/2016
Field of Education
031705 - Marine Craft Operation
Original Release Date
05/08/2016
Nominal Hours
0
Description
This unit describes the skills required to assist in a range of seamanship operations. It covers specific skills and knowledge such as general rigging and load shifting, towing, buoy attachment, berthing and slipping, equipment recovery, sea boat operations, man overboard recovery, replenishment at sea and ladder and brow deployment.This unit would be typically implemented in a Naval Defence environment but is applicable to any individual in this field of work. Tasks are carried out on a ship in a range of conditions that would typically apply to a lengthy operation, while minimising or eliminating environmental stresses and hazards, risk to personnel, vessel and the environment, and preserving individual safety.The skills and knowledge described in this unit must be applied within the legislative, regulatory and policy environment in which they are carried out. Organisational policies and procedures must be consulted and adhered to.Those undertaking this unit would generally perform routine tasks as part of a team and under indirect supervision. They would need to be prepared for a wide of range of contexts that could be unfamiliar and highly unpredictable.No licensing, legislative or certification requirements apply to unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to assist in seamanship operation
  • 1.1 Record and receive operation briefing.
  • 1.2 Identify and select equipment for the operation based on information as directed by the supervisor.
  • 1.3 Identify and note hazards and risks associated with the specific operation.
  • 1.4 Select and wear personal protective equipment based on the nature of the operation.
2. Assist in seamanship operations
  • 2.1 Identify and confirm position within the team and location for the operation.
  • 2.2 Tie and apply knots, bends, splices, whippings and hitches.
  • 2.3 Prepare and handle lines and hardware.
  • 2.4 Communicate during operations using the correct communications equipment.
  • 2.5 Identify and act upon operational hazards.
  • 2.6 Follow shipboard emergency and contingency plans in the event of a failure or emergency associated with the operation and equipment.
3. Finalise seamanship operations
  • 3.1 Recover, clean and maintain equipment.
  • 3.2 Re-stow equipment to maintain operational readiness.
  • 3.3 Attend operational debriefing and provide feedback.
  • 3.4 Complete competency log and work history sheet.
No information
No information
No information
State Code National Code Title Type
AD268 DEFSS00010 Maritime Operations Skill Set Skill set