Unit of competency Outline
Date retreived
23/07/2026 10:29 AM AWST
23/07/2026 10:29 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Set up, operate and maintain CNC machining and processing centres
Set up, operate and maintain CNC machining and processing centres
Unit of competency
National Code
LMFFM3031B
LMFFM3031B
State Code
W8631
W8631
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
03/11/2009
Field of Education
030717 - Plant And Machine Operations
Original Release Date
03/11/2009
Nominal Hours
56
Description
This unit covers the competency to set up, operate and maintain CNC machining and processing centres to produce furniture or components
Notes
Elements and Performance Criteria
1. Prepare for work
- 1.1. Work instructions are used to determine job requirements, including: design, quality, materials, equipment and quantities
- 1.2. Workplace health and safety requirements, including personal protection needs, are observed throughout the work
- 1.3. Material for machining is selected and inspected for appropriate quality
- 1.4. Procedures are determined for minimising waste material
- 1.5. Procedures are identified for maximising energy efficiency while completing the job
2. Set up for machining and processing
- 2.1. CNC program is set to job requirements
- 2.2. Safety equipment, including emergency stops, gauges, guards and controls are checked
- 2.3. Machining and processing settings and adjustments are made in accordance with job requirements and machining and processing and tool manufacturers' instructions
- 2.4. Machining and processing, cutting tools and jigs are checked for safe and effective operation
- 2.5. Trial runs are conducted to check machining and processing operation and quality of finished work
- 2.6. Final adjustments are made to CNC programs and equipment according to workplace procedures
3. Operate machining and processing centres
- 3.1. Machining and processing centres are operated and monitored to ensure product quality and output
- 3.2. Waste quantities are checked and minimised
- 3.3. Problems with the required work are identified and reported to appropriate persons
- 3.4. Items that do not meet quality requirements are repaired, recycled or discarded according to workplace procedures
- 3.5. Any authorised changes in working procedures are followed
4. Clean up work area and maintain equipment
- 4.1. Material that can be reused is collected and stored
- 4.2. Waste and scrap are removed following workplace procedures
- 4.3. Equipment and work area are cleaned and inspected for serviceable condition in accordance with workplace procedures
- 4.4. Operator maintenance is completed in accordance with manufacturers' specifications and site procedures
- 4.5. Unserviceable equipment is tagged and faults identified in accordance with workplace
- 4.6. Equipment and tooling is maintained in accordance with workplace procedures
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
CNC machining and processing centres are to include three axis machining centre and may include:
multi-tasking machining centres
flat-bed routers and mortiser
Material to be machined and processed is to include:
solid timber and manufactured board
Unit scope
Work involves reading and interpreting drawings, selecting and installing tooling, setting jigs and fixtures, programming skills (sub-programs and parametrics), performance of CAM functions, downloading and storage of data to complete detailed profiling and other specified operations
Unit context
OH&S requirements include legislation, building codes, material safety management systems, hazardous substances and dangerous goods code and local safe operating procedures
Work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements
Work requires individuals to demonstrate some discretion, judgement and problem solving skills in the set up and operation of machining and processing centres
Competency may be demonstrated in workplaces involved in the manufacture of solid timber furniture, domestic furniture, commercial furniture, kitchen and bathroom cabinets and/or furniture components
Tools and equipment are to include:
stand-alone or integral computing systems and machine-specific tools
Personal protective equipment
Personal protective equipment is to include that prescribed under legislation, regulations and enterprise policies and practices
Information and procedures
Workplace procedures relating to the use of tools and equipment
Work instructions, including job sheets, cutting lists, plans, drawings and designs
Workplace procedures relating to reporting and communication
Manufacturers' specifications and operational procedures
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
CNC machining and processing centres are to include three axis machining centre and may include:
multi-tasking machining centres
flat-bed routers and mortiser
Material to be machined and processed is to include:
solid timber and manufactured board
Unit scope
Work involves reading and interpreting drawings, selecting and installing tooling, setting jigs and fixtures, programming skills (sub-programs and parametrics), performance of CAM functions, downloading and storage of data to complete detailed profiling and other specified operations
Unit context
OH&S requirements include legislation, building codes, material safety management systems, hazardous substances and dangerous goods code and local safe operating procedures
Work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements
Work requires individuals to demonstrate some discretion, judgement and problem solving skills in the set up and operation of machining and processing centres
Competency may be demonstrated in workplaces involved in the manufacture of solid timber furniture, domestic furniture, commercial furniture, kitchen and bathroom cabinets and/or furniture components
Tools and equipment are to include:
stand-alone or integral computing systems and machine-specific tools
Personal protective equipment
Personal protective equipment is to include that prescribed under legislation, regulations and enterprise policies and practices
Information and procedures
Workplace procedures relating to the use of tools and equipment
Work instructions, including job sheets, cutting lists, plans, drawings and designs
Workplace procedures relating to reporting and communication
Manufacturers' specifications and operational procedures
EVIDENCE GUIDE
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Critical Aspects of Evidence
Locate, interpret and apply relevant information
Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment
Identify materials used in the work process
Follow work instructions, operating procedures and inspection practices to:
minimise the risk of injury to self or others
prevent damage to goods, equipment or products
maintain required production output and product quality
Identify, set up and operate CNC machining and processing centre equipment to complete detailed profiling, including:
development and application of sub-program
development and application of parametric program, and
application of CAD/CAM functions
Conduct operator maintenance on the machining and processing centre equipment
Work effectively with others
Modify activities to cater for variations in workplace contexts and environment
Resource Implications
CNC controlled equipment, standard operating procedures, unprocessed materials.
Method of Assessment
Assessment methods must confirm consistency of performance over time and in a range of workplace relevant contexts.
Assessment should be by direct observation of tasks and questioning on underpinning knowledge.
Assessment should be conducted over time and may be in conjunction with assessment of other units of competency.
Context of Assessment
Assessment may occur on the job or in a workplace simulated facility with relevant process equipment, materials, work instructions and deadlines.
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Critical Aspects of Evidence
Locate, interpret and apply relevant information
Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment
Identify materials used in the work process
Follow work instructions, operating procedures and inspection practices to:
minimise the risk of injury to self or others
prevent damage to goods, equipment or products
maintain required production output and product quality
Identify, set up and operate CNC machining and processing centre equipment to complete detailed profiling, including:
development and application of sub-program
development and application of parametric program, and
application of CAD/CAM functions
Conduct operator maintenance on the machining and processing centre equipment
Work effectively with others
Modify activities to cater for variations in workplace contexts and environment
Resource Implications
CNC controlled equipment, standard operating procedures, unprocessed materials.
Method of Assessment
Assessment methods must confirm consistency of performance over time and in a range of workplace relevant contexts.
Assessment should be by direct observation of tasks and questioning on underpinning knowledge.
Assessment should be conducted over time and may be in conjunction with assessment of other units of competency.
Context of Assessment
Assessment may occur on the job or in a workplace simulated facility with relevant process equipment, materials, work instructions and deadlines.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W0305 | LMFFM3031A | Set up, operate and maintain CNC machining and processing centres | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| WI443 | MSFFM3022 | Set up, operate and maintain computer numerically controlled (CNC) machining and processing centres | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| W651 | LMF32109 | Certificate III in Cabinet Making | Qualification |
| W031 | LMF30302 | Certificate III in Furniture Making | Qualification |
| W032 | LMF30402 | Certificate III in Furniture Making (Cabinet Making) | Qualification |
| W033 | LMF30502 | Certificate III in Furniture Making (Wood Machining) | Qualification |
| J489 | CPC31812 | Certificate III in Shopfitting | Qualification |