Unit of competency Outline
Date retreived
23/07/2026 5:39 AM AWST
23/07/2026 5:39 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Rectify and touch up vehicle paint faults using clear over base two-pack systems
Rectify and touch up vehicle paint faults using clear over base two-pack systems
Unit of competency
National Code
AURVTP117
AURVTP117
State Code
OCJ44
OCJ44
TGA Status
Current
Current
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
31/03/2021
Field of Education
030507 - Automotive Vehicle Refinishing
Original Release Date
31/03/2021
Nominal Hours
36
Description
This unit describes the skills and knowledge required to rectify and touch up paint faults on vehicle body components. This unit involves preparing for the task, selecting and using specialist tools and equipment, identifying and rectifying faults using clear over base (COB) two-pack paint materials according to manufacturer specifications, and completing workplace processes and documentation.The unit applies to those working in the automotive refinishing industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for work
- 1.1 Identify job requirements from workplace instructions
- 1.2 Identify hazards associated with the work, assess potential risks and implement control measures in line with workplace policies and procedures
- 1.3 Identify tools, equipment and chemicals required for repair activity and establish serviceability according to workplace procedures
2. Identify paint fault, its cause and rectification requirements
- 2.1 Identify cause of paint fault from paint manufacturer information and confirm with appropriate personnel
- 2.2 Inspect visually inspect faulty paintwork according to workplace procedures
- 2.3 Assess damage to paintwork through visual comparison with undamaged paintwork
- 2.4 Identify fault rectification requirements according to manufacturer and workplace procedures
3. Rectify and touch-up paint faults
- 3.1 Identify materials required to restore paintwork to pre-damage condition from paint manufacturer recommended procedures
- 3.2 Measure, mix and apply materials using approved equipment
- 3.3 Rectify and blend damaged paintwork with existing paintwork using COB two-pack system and blending and drying techniques according to workplace procedures
- 3.4 Complete rectification processes according to workplace procedures
4. Complete work processes
- 4.1 Conduct final inspection according to workplace procedures and confirm vehicle is ready for use
- 4.2 Clear work area and dispose of or recycle materials according to workplace procedures
- 4.3 Complete documentation according to workplace procedures
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| AWZ38 | AURVTP017 | Rectify and touch up vehicle paint faults using clear over base two-pack systems | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| BGA9 | AUR32420 | Certificate III in Automotive Refinishing Technology | Qualification |