Unit of competency Outline

Date retreived
22/07/2026 2:07 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Apply graining and decorative finishes

Apply graining and decorative finishes

Unit of competency
National Code
MSFFF3016
State Code
OEO88
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
08/12/2022
View on TGA
State Implementation and Classification
Approved Date
19/04/2023
Field of Education
030117 - Furniture Polishing
Original Release Date
19/04/2023
Nominal Hours
40
Description
This unit describes the skills and knowledge required to apply timber grain imitation and decorative (faux) finishes to solid timber, manufactured board and metal surfaces during finishing tasks.Furniture finishing workers with this competency follow established procedures, using discretion, judgement and problem-solving to identify and resolve potential issues. They recognise dependencies and use cooperative approaches to optimise workflow and productivity.No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Prepare for task
  • 1.1 Determine task requirements, including surface characteristics and required surface finish, from workplace documentation
  • 1.2 Plan for work by identifying processing and application techniques, time and safety requirements and efficient work methods
  • 1.3 Identify and follow work health and safety requirements
  • 1.4 Identify tools, equipment and accessories to meet task requirements and check for safety and functionality
2. Prepare for application of materials
  • 2.1 Check surfaces for contamination and correct preparation in accordance with workplace procedures and standards
  • 2.2 Identify products with surface or other faults and perform required repairs
  • 2.3 Identify and prepare required materials to complete the task
  • 2.4 Perform trial applications of material to check equipment operation, materials consistency, viscosity and sample match
  • 2.5 Identify and rectify or adjust faults and inconsistencies in colour and surface appearance in accordance with workplace procedures
3. Apply finishing materials
  • 3.1 Identify techniques for applying graining solution and other finishes to meet task requirements
  • 3.2 Apply materials in accordance with task requirements, manufacturer specifications and workplace procedures
  • 3.3 Inspect finished products for suitability for further processing
  • 3.4 Rectify products that do not meet quality specifications or tag for further investigation
4. Clean work area and maintain equipment
  • 4.1 Check, clean and store equipment and any unused materials in accordance with workplace procedures
  • 4.2 Tag unserviceable equipment, identify faults and inform appropriate personnel in accordance with workplace procedures
  • 4.3 Clean work area, including washing down all areas used for bleaching, safely dispose of waste and identify items for recycling in accordance with workplace and environmental standards
  • 4.4 Complete required workplace records
No information
No information
Replaces
State Code National Code Title Type
WI327 MSFFF3007 Apply graining and decorative finishes Unit of competency