Unit of competency Outline

Date retreived
22/07/2026 6:36 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Machine timber or engineered wood products using CNC machining and processing centres

Machine timber or engineered wood products using CNC machining and processing centres

Unit of competency
National Code
FWPCOT3332
State Code
OFD19
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
25/01/2023
View on TGA
State Implementation and Classification
Approved Date
19/05/2023
Field of Education
030717 - Plant And Machine Operations
Original Release Date
19/05/2023
Nominal Hours
32
Description
This unit of competency describes the skills and knowledge required to set up, operate and maintain computer numerical control (CNC) machining and processing centres used to process and cut holes in engineered wood products and timber components. Work also involves operator maintenance.The unit applies to individuals who operate CNC machining and processing centres in a timber or wood products production facility.All work must be carried out to comply with workplace procedures, according to state/territory health and safety regulations, legislation and standards that apply to the workplace.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for machining engineered wood products or timber
  • 1.1 Review work order, machining specifications, workplace health and safety and environmental protection practices and/or procedures, and emergency procedures for CNC machining operation and, where required, check with appropriate personnel
  • 1.2 Identify and report hazards and use personal protective equipment according to workplace requirements and health and safety legislation to maintain safe work practices
  • 1.3 Obtain type and quantity of timber or engineered wood products for machining from storage location
2. Set up CNC machine
  • 2.1 Set CNC program to meet work specifications
  • 2.2 Check CNC machine mechanisms, cutting tools, jigs, emergency stops, gauges, guards and controls for safe and effective operation
  • 2.3 Adjust CNC machine settings according to work specifications
  • 2.4 Complete trial run to check system and machine operation for accuracy, quality and dimensions of finished work
  • 2.5 Accept or reject trialled timber or engineered wood products, and dispose of according to workplace environmental protection practices and/or procedures
  • 2.6 Complete final adjustments to CNC program, cutting tools and equipment
3. Operate CNC machine
  • 3.1 Use CNC machine, cutting tools and equipment according to purpose, workplace health and safety procedures and environmental protection practices and/or procedures, manufacturer instructions and operational capacity
  • 3.2 Feed engineered wood product or timber into CNC machine, operate cutting tools according to tooling requirements and regularly monitor to minimise waste and ensure correct dimensions are produced
  • 3.3 Repair or dispose of incorrect cuts, off-cuts and timber or engineered wood products with defects according to workplace environmental protection practices and/or procedures
  • 3.4 Identify routine processing problems and resolve or report to appropriate personnel
4. Complete operator maintenance
  • 4.1 Lock out CNC machine according to workplace health and safety procedures
  • 4.2 Check cutting tools for bluntness or damage
  • 4.3 Remove and replace cutting tools according to manufacturer recommendations
  • 4.4 Dispose of used cutting tools according to workplace environmental protection practices and/or procedures
  • 4.5 Keep machining area clear of dust and debris according to workplace health and safety procedures
  • 4.6 Record and report production outcomes, machine and equipment faults and maintenance requirements to appropriate personnel
No information
No information
Replaces
State Code National Code Title Type
AXL28 FWPCOT3235 Machine material using CNC machining and processing centres Unit of competency