Unit of competency Outline

Date retreived
22/07/2026 6:45 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Make simple timber joints

Make simple timber joints

Unit of competency
National Code
MSFFP2006
State Code
BAX71
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
12/07/2016
View on TGA
State Implementation and Classification
Approved Date
05/10/2016
Field of Education
030113 - Cabinet Making
Original Release Date
05/10/2016
Nominal Hours
35
Description
This unit specifies the competency required to make simple timber joints by hand operations.It is designed for use in a pre-employment skills introduction program and is suitable for use in institutional-based vocational programs. Skills development will take place under direct supervision.This unit is not to be used in a traineeship or apprenticeship training program or associated qualifications. It is only to be used in pre-employment programs and carries no credit towards apprenticeship/trade and other qualification types in manufacturing and furnishings.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Determine job requirements
  • 1.1 Identify job requirements, including product purpose, furniture style and joint type, from specifications, drawings, designs, project sheets or work instructions
  • 1.2 Identify the workplace, health and safety (WHS) practices and procedures to be used
2 Plan and prepare for work
  • 2.1 Select and check tools, equipment and materials prior to use to ensure they are appropriate for the work, serviceable and in a safe condition
  • 2.2 Select adhesives and fasteners to match the joint type
3 Make simple joint
  • 3.1 Comply with work, health and safety (WHS) requirements at all times
  • 3.2 Use appropriate personal protective equipment (PPE) in accordance with procedures
  • 3.3 Mark out cutting and joining lines to suit joint type
  • 3.4 Check measurements and calculations for accuracy to ensure quality outcomes
  • 3.5 Construct the joints using furniture sector hand and power tools
  • 3.6 Join timber in accordance with project sheets or work instruction requirements
  • 3.7 Use fasteners, adhesives and appropriate clamping systems to make joints firm, where required
  • 3.8 Check finished joint against quality requirements
4 Check work area and maintain equipment
  • 4.1 Clean equipment and inspect for serviceable condition and store and report faulty and/or defective equipment in accordance with procedures
  • 4.2 Store or dispose of materials according to procedures
  • 4.3 Clean and maintain work area
No information
No information
Replaced By
State Code National Code Title Type
OEJ89 MSFFP2012 Join furnishing materials Unit of competency
State Code National Code Title Type
BDH7 MSF20516 Certificate II in Furniture Making Pathways Qualification