Unit of competency Outline

Date retreived
22/07/2026 9:07 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Use furniture making sector hand and power tools

Use furniture making sector hand and power tools

Unit of competency
National Code
MSFFM2001
State Code
WI410
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
10/12/2013
View on TGA
State Implementation and Classification
Approved Date
19/06/2014
Field of Education
030717 - Plant And Machine Operations
Original Release Date
19/06/2014
Nominal Hours
38
Description
This unit of competency covers using hand and power tools in applications relating to furniture making.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Identify hand and power tools
  • 1.1 Types of hand and power tools and their functions are identified
  • 1.2 Work health and safety (WHS) requirements, including personal protection needs, are observed throughout the work
  • 1.3 Sources of power supply are recognised
2 Select and use hand tools
  • 2.1 Hand tools selected are consistent with needs of the job, checked for serviceability and safety, and any faults reported to supervisor
  • 2.2 Equipment is selected to hold or support material for hand tools application where applicable
  • 2.3 Material is located and held in position for hand tool application
  • 2.4 Hand tools are safely and effectively used according to their intended use and safely located when not in immediate use
3 Select and use power tools
  • 3.1 Power tools are selected consistent with needs of the job in accordance with conventional work practice, are visually checked for serviceability and safety in accordance with WHS requirements, and any faults reported to supervisor
  • 3.2 Equipment is selected to hold or support materials for power tool application as applicable
  • 3.3 Material is located and held in position for power tool application as applicable
  • 3.4 Power tools are safely and effectively used in application processes and safely located when not in use
4 Clean up work area and tools
  • 4.1 All tools are cleaned, maintained and stored
  • 4.2 Equipment is cleaned, maintained and stored
  • 4.3 Work area is cleared and waste removed
No information
No information
Replaces
State Code National Code Title Type
W8599 LMFFM2001B Use furniture making sector hand and power tools Unit of competency
Replaced By
State Code National Code Title Type
OEL27 MSFFM2013 Use furniture making hand and power tools Unit of competency