Unit of competency Outline

Date retreived
22/07/2026 8:48 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Produce complex truss and frame plans and details using computers

Produce complex truss and frame plans and details using computers

Unit of competency
National Code
FWPCOT4201
State Code
AXK97
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
13/05/2016
View on TGA
State Implementation and Classification
Approved Date
05/10/2016
Field of Education
020115 - Computer Graphics
Original Release Date
05/10/2016
Nominal Hours
60
Description
This unit of competency describes the outcomes required to use computerised systems to produce complex truss or frame plans, including layout production, fabrication and installation instructions. Work is completed in a forest and wood products office setting.The unit applies to a designer or developer of truss and frame plans.No licensing, legislative, regulatory, or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Interpret plans and loading conditions
  • 1.1 Interpret and assess plans, drawing views and notes; identify loading information, design requirements and restrictions.
  • 1.2 Obtain additional information and data from appropriate personnel or sources.
  • 1.3 Create functional and pictorial image of structure, trusses or frames based on design requirements.
  • 1.4 Refer design requirements outside software limitations to appropriate personnel for resolution.
2. Test and select design options
  • 2.1 Transfer fixed design details to layout data in line with software requirements.
  • 2.2 Specify frame or truss design types, and select timber type and species in line with material suitability and availability.
  • 2.3 Set common industry spacing of frames, trusses and their components to defined design structure in line with industry standards.
  • 2.4 Fix component sizes to clarify and firm design options.
  • 2.5 Select layouts, spacing and sizing of individual structural members progressively in line with software requirements.
  • 2.6 Select, review and revise design details in line with work order.
3. Produce layouts and cutting requirements
  • 3.1 Review design records for design integrity, completeness and consistency in line with certifying authority standards.
  • 3.2 Produce structure layout drawings and truss or frame assembly drawings using appropriate software.
  • 3.3 Produce component cutting detail in line with production requirements and schedules.
  • 3.4 Prepare and document production and installation advice in line with organisational procedures and industry standards.
  • 3.5 Complete and maintain design records and documentation in line with organisational procedures.
4. Provide advice on design and production issues
  • 4.1 Answer questions about designs and assembly requirements clearly and comprehensively.
  • 4.2 Use effective communication techniques to assist and develop production personnel.
  • 4.3 Provide alternative materials and sizes for components within design scope and production requirements.
  • 4.4 Discuss common site problems and select appropriate prevention strategies to ensure future practice meets design requirements.
No information
No information
Replaces
State Code National Code Title Type
D5964 FPICOT4201B Produce complex truss and frame plans and details using computers Unit of competency