Unit of competency Outline

Date retreived
22/07/2026 6:43 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install conductive resilient floor coverings

Install conductive resilient floor coverings

Unit of competency
National Code
MSFFL3020
State Code
WI377
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
10/12/2013
View on TGA
State Implementation and Classification
Approved Date
19/06/2014
Field of Education
040321 - Floor Coverings
Original Release Date
19/06/2014
Nominal Hours
16
Description
This unit of competency covers installing conductive resilient floor coverings, including preparation, cutting, laying and fixing.Licensing, legislative or certification requirements may apply to this unit and relevant state/territory and local government agencies should be consulted to determine any necessary certification or licensing for undertaking flooring work. Access to construction sites requires certification of general induction training specified by the National Code of Practice for Induction for Construction Work (ASCC 2007).
Notes
Elements and Performance Criteria
1 Prepare for installation
  • 1.1 Applicable work health and safety (WHS), legislative and organisational requirements relevant to installing conductive resilient floor coverings are verified and complied with
  • 1.2 Instructions and/or plans are read and interpreted to identify the process required to complete work tasks
  • 1.3 Sub-floor condition is assessed for suitability for installation of conductive resilient floor coverings
  • 1.4 Suitable adhesives, trims and accessories are selected
  • 1.5 Tools, equipment and materials are selected and checked prior to use, to ensure that they are appropriate for the work, serviceable and in a safe condition
  • 1.6 Sequence of work is planned, including the starting point, to ensure efficiency and quality of installation
  • 1.7 Materials are laid out to meet pattern and specification requirements, and minimise waste and joins
2 Set out materials
  • 2.1 Conductive resilient floor coverings to be installed are checked against work order
  • 2.2 Conductive resilient floor coverings are acclimatised according to manufacturer recommendations
  • 2.3 Conductive resilient floor coverings for fixing are organised and used in accordance with relevant safety management requirements
  • 2.4 Working lines and starting point are established
3 Lay conductive resilient flooring
  • 3.1 Instructions and sequence for laying and fixing are followed
  • 3.2 Copper grid and isolating layer are installed to specification
  • 3.3 Conductive resilient floor coverings are laid out to meet directional sequence, pattern match, specification requirements, and to minimise waste and joins as appropriate
  • 3.4 Conductive resilient floor coverings are accurately and clearly marked for cutting
  • 3.5 Conductive resilient floor coverings are cut to required pattern and shape with minimum waste of materials
  • 3.6 Conductive resilient floor coverings for welding and fixing are organised and used in accordance with relevant safety management requirements
  • 3.7 Welding and fixing methods and equipment are used following manufacturer instructions
  • 3.8 Conductive resilient floor covering is laid and fixed to meet job specifications
  • 3.9 Vinyl skirting, reducer and edge strips are set out and installed, as required
  • 3.10 Completed installation is checked for flaws in installation and materials and faults rectified following workplace procedures
4 Complete housekeeping
  • 4.1 Unused materials are stored or recycled as required
  • 4.2 Tools and equipment are cleaned and stored appropriately
  • 4.3 Work area is cleaned and rubbish disposed of appropriately
  • 4.4 Workplace documentation is completed
No information
No information
Replaced By
State Code National Code Title Type
OAJ57 MSFFL3071 Install anti-static and conductive resilient floor coverings Unit of competency
State Code National Code Title Type
J736 MSF30813 Certificate III in Flooring Technology Qualification