Unit of competency Outline
Date retreived
22/07/2026 12:58 AM AWST
22/07/2026 12:58 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Apply principles of open channel hydraulics
Apply principles of open channel hydraulics
Unit of competency
National Code
NWPHYD002
NWPHYD002
State Code
OAO92
OAO92
TGA Status
Current
Current
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
18/04/2019
Field of Education
010711 - Hydrology
Original Release Date
18/04/2019
Nominal Hours
35
Description
This unit involves the skills and knowledge required to apply principles of open channel hydraulics.It includes using hydraulic principles, calculating theoretical flows, collecting, interpreting, verifying data and applying theoretical techniques to produce flow data essential to performance. It also includes applying relevant legislation, regulations, industry standards and workplace policies and procedures. This unit applies to water operators involved in the monitoring of all elements of the water cycle and impacts on the environment. Those undertaking this unit would work in small teams, autonomously or under supervision, while performing complex tasks in a broad range of contexts that could be unpredictable, including remote, confined spaces, near water and/or at heights.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Select open channel hydraulic methodology
- 1.1 Identify monitoring objectives of the site and hydraulic calculation requirements
- 1.2 Select methodology for open channel hydraulic calculations
- 1.3 Identify hydraulic principles used for verification of calculations
- 1.4 Select other methodologies to review initial calculations
2 Collect and review data for flow calculations
- 2.1 Measure and collect appropriate data to calculate theoretical flows based on methodology selected
- 2.2 Determine the hydraulic characteristics of a monitoring site
- 2.3 Measure and collect appropriate data to calculate flows theoretically
- 2.4 Estimate hydraulic coefficients based on observations
- 2.5 Prepare records in a format suitable for dissemination
- 2.6 Review data collected and subsequent calculations for inconsistencies against measured flows
3 Select the appropriate control structure
- 3.1 Select appropriate control structures based on characteristics of the open channel and its catchment
- 3.2 Identify and determine the method to calculate flow by using the appropriate formulae for the control structure
4 Calculate flow in open channels
- 4.1 Select and use the appropriate formulae for calculating flows in open channels based on the characteristics of the open channel and its catchment
- 4.2 Identify the limitations of the formulae
- 4.3 Identify factors that would cause variations in the results
- 4.4 Verify results by applying hydraulic principles and other methodologies
- 4.5 Determine the characteristics of open channel pipe flow
5 Calculate flow from pressure measurements
- 5.1 Determine flow-based calculations by using pressure instruments
- 5.2 Make adjustments for absolute pressure instruments to measure head in open channels
- 5.3 Make corrections in pressure measurements to allow for head measurement of salt water
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| AVZ20 | NWPHYD001 | Apply principles of open channel hydraulics | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| BTT8 | NWP50126 | Diploma of Water Industry Operations | Qualification |
| BEG3 | NWP50118 | Diploma of Water Industry Operations | Qualification |