Unit of competency Outline

Date retreived
23/07/2026 12:56 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Conduct filtering process

Conduct filtering process

Unit of competency
National Code
RIIPBE303D
State Code
WH549
TGA Status
Current
DTWD Status
Approved
Current Release Number
3.00
Current Release Date
07/12/2014
View on TGA
State Implementation and Classification
Approved Date
29/05/2014
Field of Education
030717 - Plant And Machine Operations
Original Release Date
29/05/2014
Nominal Hours
25
Description
This unit describes a participant’s skills and knowledge required to conduct filtering process in Coal and Metalliferous mining.This unit is appropriate for those working in operational roles.Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and industry sectors. Relevant information must be sourced prior to application of the unit.
Notes
Elements and Performance Criteria
1. Plan and prepare for filtering process
  • 1.1 Access, interpret and apply filtering process documentation and ensure the work activity is compliant
  • 1.2 Obtain, read, interpret, clarify and confirm work requirements
  • 1.3 Coordinate and communicate with other personnel using approved communication method
  • 1.4 Select and wear personal protective equipment appropriate for work activities
  • 1.5 Select appropriate type of auxiliary equipment for work activities
  • 1.6 Perform equipment pre-start checks
  • 1.7 Identify and address potential risks, hazards and environmental issues, and implement control measures
  • 1.8 Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency
  • 1.9 Use dust suppression and extraction methods
  • 1.10 Ensure area is well ventilated
2. Start-up equipment in sequence
  • 2.1 Carry out start-up procedures and complete start-up checks according to plant configuration and system requirements
  • 2.2 Confirm plant is operational
3. Operate and monitor equipment
  • 3.1 Read, interpret and apply data from equipment indicators
  • 3.2 Continuously inspect plant and identify defects and potential problems
  • 3.3 Adjust equipment to approved operating parameters
  • 3.4 Control feed to equipment
  • 3.5 Monitor moisture in cake and density of filtrate
  • 3.6 Monitor reagent addition for cleaning
  • 3.7 Monitor and maintain air systems
  • 3.8 Maintain cleanliness of filtration systems
  • 3.9 Complete all required written documentation clearly, concisely and on time
  • 3.10 Pass on end of shift information verbally or in writing to oncoming shift
4. Shutdown in sequence and/or isolate equipment
  • 4.1 Clear build-up from filtering circuit before commencing shutdown
  • 4.2 Shutdown or isolate equipment based on process and safety requirements
  • 4.3 Perform post-shutdown or isolation checks
  • 4.4 Return equipment to service
5. Conduct housekeeping activities
  • 5.1 Clear work area and dispose of or recycle materials
  • 5.2 Clean and maintain condition of equipment, ensure suitability for use, and address/report issues
  • 5.3 Process records
No information
No information
Replaces
State Code National Code Title Type
D9366 RIIPBE303B Conduct filtering process Unit of competency