Unit of competency Outline
Date retreived
22/07/2026 10:03 AM AWST
22/07/2026 10:03 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Troubleshoot resonance circuits in an electronic apparatus
Troubleshoot resonance circuits in an electronic apparatus
Unit of competency
National Code
UEEEC0074
UEEEC0074
State Code
OBZ33
OBZ33
TGA Status
Current
Current
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
12/07/2021
Field of Education
031317 - Electronic Equipment Servicing
Original Release Date
12/07/2021
Nominal Hours
72
Description
This unit involves the skills and knowledge required to troubleshoot resonance circuits in an electronic apparatus.It includes working safely, applying problem-solving procedures, and providing solutions derived from measurements and calculations to problems in resonance circuits.Permits may be required for some work environments, such as confined spaces, working aloft, near live electrical apparatus and site rehabilitation.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Prepare to troubleshoot resonance circuits
- 1.1 Work health and safety (WHS)/occupational health and safety (OHS) processes and workplace procedures for a given work area are identified, obtained and applied
- 1.2 WHS/OHS risk control work preparation measures and workplace procedures are followed
- 1.3 Scope of fault is obtained from documentation and/or work supervisor to determine work to be undertaken
- 1.4 Advice is sought from work supervisor to ensure the work is coordinated effectively with others
- 1.5 Sources of materials required for work are determined in accordance with workplace procedures
- 1.6 Tools, equipment and testing devices required for work are obtained and checked for correct operation and safety
2 Solve problems in resonance circuits
- 2.1 WHS/OHS risk control work measures and workplace procedures are followed
- 2.2 Need to test and measure live work is determined in accordance with WHS/OHS requirements and workplace procedures
- 2.3 Circuits are checked and isolated in accordance with WHS/OHS requirements and workplace procedures
- 2.4 Fault finding of resonance circuits is conducted using measured and calculated values of parameters in accordance with workplace procedures
- 2.5 Unplanned situations are dealt with safely and with the approval of relevant person/s in accordance with workplace procedures
- 2.6 Fault-finding activities are carried out efficiently without waste of materials or damage to apparatus, the surrounding environment or services using sustainable energy practices
3 Complete work and document troubleshooting activities
- 3.1 WHS/OHS work completion risk control measures and workplace procedures are followed
- 3.2 Worksite is cleaned and made safe in accordance with workplace procedures
- 3.3 Work completion is documented and relevant person/s notified in accordance with workplace procedures
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| WC544 | UEENEEH114A | Troubleshoot resonance circuits in an electronic apparatus | Unit of competency |