Unit of competency Outline

Date retreived
22/07/2026 6:17 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Assemble components

Assemble components

Unit of competency
National Code
CPCCJN2001
State Code
OCQ81
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
24/12/2024
View on TGA
State Implementation and Classification
Approved Date
01/06/2021
Field of Education
030113 - Cabinet Making
Original Release Date
01/06/2021
Nominal Hours
32
Description
This unit of competency specifies the skills and knowledge required to assemble manufactured components to form a completed constructed unit, meeting all relevant requirements of Australian Standards, work health and safety (WHS), and Commonwealth and state or territory legislation. The unit is suitable for those with basic skills and knowledge undertaking routine work tasks under the direction of more experienced workers.Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001Prepare to work safely in the construction industry meets this requirement.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Plan and prepare.
  • 1.1 Read and interpret work instructions and plan sequence of work.
  • 1.2 Plan all work to comply with laws and regulations, Australian Standards, work health and safety (WHS) and environmental requirements, manufacturers’ specifications, workplace requirements, drawings and specifications.
  • 1.3 Select tools and equipment, check for serviceability and report any faults.
  • 1.4 Select and use personal protective equipment (PPE) for each part of the task.
  • 1.5 Inspect work site, locate services, assess hazards and apply risk controls, including required signage and barricades.
  • 1.6 Select materials required for task, calculate quantities, handle safely and prepare and position ready for use.
2 Assemble and hold components in place.
  • 2.1 Select component parts for assembly and prepare hardware.
  • 2.2 Select and use packing material for protection of surfaces during assembly.
  • 2.3 Apply adhesive according to specifications.
  • 2.4 Locate and hold components in their designed assembled positions.
3 Secure assembled components.
  • 3.1 Secure frame or unit using appropriate assembly methods.
  • 3.2 Secure fastened joints by fasteners or hardware.
4 Finish assembly and clean up.
  • 4.1 Dismantle assembly and holding system.
  • 4.2 Clean up, meeting all legislative and workplace requirements for safety, waste disposal and materials handling.
  • 4.3 Check, maintain and store tools and equipment and report any faults.
No information
No information
Replaces
State Code National Code Title Type
W9408 CPCCJN2001A Assemble components Unit of competency
State Code National Code Title Type
BGC8 CPC20220 Certificate II in Construction Pathways Qualification
BGD6 CPC31920 Certificate III in Joinery Qualification
BGE7 CPC32320 Certificate III in Stonemasonry Qualification