Unit of competency Outline

Date retreived
24/07/2026 7:31 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Measure spirometry/flow volume loop

Measure spirometry/flow volume loop

Unit of competency
National Code
HLTPAT414C
State Code
D8413
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
25/03/2011
View on TGA
State Implementation and Classification
Approved Date
01/08/2011
Field of Education
030717 - Plant And Machine Operations
Original Release Date
01/08/2011
Nominal Hours
50
Description
DescriptorThis unit describes the knowledge and skills required to prepare a client for measure of spirometry/flow volume loop, and to provide a report as an aid to the diagnosis and management of ventilatory impairment
Notes
Elements and Performance Criteria
1. Prepare spirometer and materials for use
  • 1.1 Ensure materials and spirometer selected are clean and in working order
  • 1.2 Conduct performance check of spirometer
2. Prepare client for procedure
  • 2.1 Arrange client bookings according to organisation procedures
  • 2.2 Receive and check request for spirometry measurement for background client information
  • 2.3 Correctly identify client and reassure and inform the client regarding the procedure
  • 2.4 Record and document client details
  • 2.5 Assess client for contraindications for performing spirometry
  • 2.6 Obtain clarification from requesting medical officer when necessary
  • 2.7 Calculate reference values
  • 2.8 Explain procedure clearly and simply and demonstrate to client
3. Perform spirometry
  • 3.1 Initialise equipment to commence recording and record additional information
  • 3.2 Coach client through procedure with the provision of continuous instruction, encouragement and reassurance
  • 3.3 Assess client throughout the procedure for ability to continue
  • 3.4 Identify recording as technically correct
  • 3.5 Provide client with feedback on performance
  • 3.6 Produce minimum of three technically correct recordings
  • 3.7 Repeat spirometry as necessary to comply with current standards for reproducibility
  • 3.8 Make technically acceptable measurements according to current standards
  • 3.9 Select indices for report in accordance with current standards
  • 3.10 Correctly assess the need for administration of a bronchodilator in accordance with current standards and medical officer request
  • 3.11 Identify and respond to clinical emergencies in accordance with organisation emergency procedures
4. Repeat spirometry measurement
  • 4.1 Following the administration of a bronchodilator by an authorised person, allow sufficient time for its peak effect before proceeding
  • 4.2 Initialise equipment to commence recording and record additional information
  • 4.3 Coach client through procedure with the provision of continuous instruction, encouragement and reassurance
  • 4.4 Ensure recording is technically correct
  • 4.5 Provide client with feedback on performance
  • 4.6 Produce a minimum of three technically correct recordings
  • 4.7 Repeat spirometry as necessary to comply with current standards for reproducibility
  • 4.8 Make technically acceptable measurements according to current standards
  • 4.9 Select indices for report in accordance with current standards
5. Complete spirometry measurement
  • 5.1 Assist client as required on completion of procedure
  • 5.2 Review follow up arrangements with client
  • 5.3 Respond appropriately to client's questions
  • 5.4 Dispose of or clean materials in accordance with organisation policies and procedures, and infection control guidelines
  • 5.5 Clean, restock and store equipment according to manufacturer's guidelines
  • 5.6 Complete report to technically acceptable standards and forward to physician for interpretation
  • 5.7 Forward report and interpretation to requesting medical officer
  • 5.8 Enter details of client and test completed on to database and/or hospital information system
No information
No information
Replaces
State Code National Code Title Type
C5283 HLTPAT14A Measure spirometry/flow volume loop Unit of competency
Replaced By
State Code National Code Title Type
WD252 HLTPAT414D Measure spirometry-flow volume loop Unit of competency
No information