Unit of competency Outline

Date retreived
22/07/2026 10:00 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Construct brick and block structures and features

Construct brick and block structures and features

Unit of competency
National Code
AHCLSC303
State Code
BAQ62
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
27/06/2016
View on TGA
State Implementation and Classification
Approved Date
12/01/2017
Field of Education
040309 - Bricklaying And Stonemasonry
Original Release Date
12/01/2017
Nominal Hours
35
Description
This unit of competency describes the skills and knowledge required to construct brick structures and features or block structures and features, or both as a component of a landscaping project.This unit applies to individuals who take responsibility for their own work and for the quality of the work of others. They use discretion and judgement in the selection, allocation and use of available resources. All work is carried out to comply with workplace procedures.No occupational licensing, legislative or certification requirements are known to apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Plan and prepare work
  • 1.1 Interpret plans and specifications
  • 1.2 Check the quantity and quality of materials
  • 1.3 Select tools and equipment and check for serviceability
  • 1.4 Identify hazards, assess risks and implement controls accordingly
  • 1.5 Identify and ameliorate the potential environmental impacts of proposed brick and block construction works
  • 1.6 Select and use suitable personal protective equipment (PPE)
2. Set out and prepare the site
  • 2.1 Determine and locate services
  • 2.2 Mark out the position of the structure or feature according to site plans
  • 2.3 Establish profiles to conform to the nominated tolerances
  • 2.4 Prepare subsoil by removing all debris, vegetable matter and topsoil to provide a solid foundation for construction
  • 2.5 Install drainage systems according to site plans and specifications
  • 2.6 Place and compact sub-base to material the required finished levels
3. Construct structure or feature
  • 3.1 Mix mortar to determined ratio and add bonding and colouring agents and other appropriate admixes, in accordance with specifications
  • 3.2 Lay damp proofing and base course of brick or block work
  • 3.3 Lay courses of brick or block work using designated bond(s) in a manner that will ensure the viability and stability of the structure
  • 3.4 Apply finishes to brick or block work
4. Check quality of work and clean-up site
  • 4.1 Inspect the quality of finished works to ensure the standard of the finished structure or feature has been achieved
  • 4.2 Clean down brick or block work surfaces in an environmentally safe and sensitive manner
  • 4.3 Clean, store and maintain all tools and equipment
No information
No information
Replaces
State Code National Code Title Type
D6917 AHCLSC303A Construct brick and/or block structures and features Unit of competency
Replaced By
State Code National Code Title Type
ODV16 AHCLSC312 Construct brick and block structures and features Unit of competency