Unit of competency Outline
Date retreived
22/07/2026 7:12 AM AWST
22/07/2026 7:12 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Perform leak detection
Perform leak detection
Unit of competency
National Code
NWPNET015
NWPNET015
State Code
AVY76
AVY76
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
15/04/2016
Field of Education
030907 - Water And Sanitary Engineering
Original Release Date
15/04/2016
Nominal Hours
20
Description
This unit describes the outcomes required to plan leak detection activities and to locate, identify and report leaks in water distribution networks (pressure mains).This unit applies to those working as field staff with a specific responsibility for planning and implementing leak detection activities.The skills and knowledge described in this unit must be applied within the legislative, regulatory and policy environment in which they are carried out. Organisational policies and procedures must be consulted and adhered to, particularly those related to WHS.Those undertaking this unit would work under indirect supervision, while performing routine tasks in a familiar context, ensuring minimum damage to the environment. No licensing, legislative or certification requirements apply to unit at the time of publication.
Notes
Elements and Performance Criteria
1. Plan for leak detection
- 1.1 Determine work site boundaries and leak detection requirements from plans, specifications and instructions.
- 1.2 Select and check equipment.
- 1.3 Plan for leak detection using site inspection and service search diagrams according to work site requirements.
2. Operate leak detection equipment and report work
- 2.1 Determine and mark work site boundaries from plans and service search diagrams.
- 2.2 Select, fit and use personal protective equipment.
- 2.3 Operate leak detection equipment.
- 2.4 Mark the location of leaks.
- 2.5 Expose leaks and arrange repair according to testing outcomes and organisational and statutory requirements.
- 2.6 Review, record and report work.
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| D1917 | NWP339B | Perform leak detection | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| OBN89 | NWPNET036 | Perform leak detection | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| AYW7 | NWP30215 | Certificate III in Water Industry Operations | Qualification |