Unit of competency Outline

Date retreived
22/07/2026 10:05 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Apply protective coating systems to structures

Apply protective coating systems to structures

Unit of competency
National Code
TLIW3034
State Code
AVH31
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
29/01/2021
View on TGA
State Implementation and Classification
Approved Date
23/02/2016
Field of Education
039907 - Rail Operations
Original Release Date
23/02/2016
Nominal Hours
20
Description
This unit involves the skills and knowledge required to apply protective coating systems to structures using manual or mechanical methods in accordance with organisational requirements. It includes planning, preparing the surface, applying surface coatings and completing required documentation. People achieving competence in this unit will need to fulfil any legislated work health and safety (WHS)/occupational health and safety (OHS) requirements and applicable state/territory rail safety requirements, and to comply with relevant codes of practice and/or guidelines.Work involves applying routine operational principles and procedures when applying protective coating systems to structures, as part of workplace activities across a variety of contexts within the Australian rail system.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Plan surface coating process
  • 1.1 Equipment, accessories and consumables are assembled and checked for applicability to the surface coating tasks
  • 1.2 Safety data sheets (SDS)/material safety data sheets (MSDS), product application and safety information are read and used to inform work practices
  • 1.3 Hazards are identified, risks are assessed and control measures are implemented
  • 1.4 Particular process techniques, time and safety requirements are noted and used to inform work planning
2 Undertake surface preparation
  • 2.1 Characteristics of uncoated surfaces and problems to be rectified are identified
  • 2.2 Appropriate surface preparation is carried out in accordance with identified problems and organisational standards
  • 2.3 Surface preparation is checked for compliance with required organisational standards
3 Apply surface coating
  • 3.1 Required surface coating materials and methods to be used are identified and appropriate tools, equipment and materials are selected
  • 3.2 Sequence of work is identified, maximising potential of the applied finish
  • 3.3 Equipment and accessories are used in line with manufacturer and organisational specifications
  • 3.4 Surface coating depth and coverage are checked for compliance with specifications
  • 3.5 Surfaces are kept free of contamination
  • 3.6 Faults and problems are identified and action is taken to rectify them in accordance with manufacturer specifications and organisational procedures
4 Complete workplace operations
  • 4.1 Tools and equipment are cleaned prior to storage
  • 4.2 Tools, equipment and unused materials are relocated to storage or next operational location as required
  • 4.3 Waste materials are disposed of correctly following organisational and environmental policies and procedures
  • 4.4 Documentation and records are completed in accordance with organisational procedures
No information
No information
Replaces
State Code National Code Title Type
S8338 TLIW3034A Apply protective coating systems to structures Unit of competency