Unit of competency Outline
Date retreived
22/07/2026 8:53 AM AWST
22/07/2026 8:53 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Operate an agitator
Operate an agitator
Unit of competency
National Code
TLIC3071A
TLIC3071A
State Code
S8275
S8275
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
30/10/2014
Field of Education
030717 - Plant And Machine Operations
Original Release Date
30/10/2014
Nominal Hours
40
Description
This unit involves the skills and knowledge required to operate an agitator safely, including systematically and efficiently controlling all vehicle functions, monitoring traffic and road conditions, and managing vehicle condition and performance. Licensing, legislative, regulatory and certification requirements are applicable to this unit.
Notes
Elements and Performance Criteria
1 Prepare the vehicle
- 1.1 Pre-operational check of the agitator is completed in line with organisational requirements
- 1.2 Concrete is charged to the agitator and slump is adjusted in line with customer requirements and organisational procedures
- 1.3 Vehicle exterior is cleaned to meet organisational policy and regulatory requirements
- 1.4 Most efficient route of travel is determined to achieve customer and regulatory requirements
- 1.5 Traffic and road conditions are constantly monitored and acted upon to enable safe operation
- 1.6 Appropriate procedures are followed in the event of a driving emergency
2 Monitor and maintain vehicle performance
- 2.1 Performance position and efficiency of vehicle operation are monitored during use
- 2.2 Defective or irregular performance and malfunctions are reported to the appropriate authority
- 2.3 Vehicle records are updated and maintained, and information is processed in accordance with workplace procedures
3 Deliver concrete to site
- 3.1 Pre-site check is completed before entry on to worksite in line with regulatory and company requirements
- 3.2 Personal protective equipment (PPE) is worn in accordance with workplace policy
- 3.3 Vehicle is parked and secured in accordance with manufacturer specifications, traffic regulations and workplace procedures
- 3.4 Ancillary equipment is attached and operated in accordance with company procedures and regulatory requirements.
- 3.5 Concrete is discharged in line with customer requirements and company policy and procedure
4 Finalise concrete delivery
- 4.1 Relevant documentation is completed on delivery of concrete, in line with customer requirements and company policy and procedure
- 4.2 Vehicle is cleaned to meet organisational policy and regulatory requirements
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance.
Pre-operational checks may include:
visual check of vehicle
checking and topping up fluid levels
checking:
tyre pressures
operation of vehicle lights and indicators
brakes
wheel nuts
barrel functions
emergency stops
radio functions
Communication includes:
constant communication with:
relevant authority on site
customers
batcher
Personal safety measures include:
manual-lifting techniques
three points of contact when using ladders
correct use of safety rails and walkways
safety glasses
safety footwear
hard hats
high visibility clothing
hearing protection
Concrete discharge methods include:
concrete pump
wheelbarrow
kibble
Ancillary equipment includes:
hoses
chutes
remote control
ladders
chute locks
Minor routine repairs may include:
replacing:
blown globes in vehicle lights
broken fanbelts
blown fuses
door mirrors
broken coolant hoses
repairs to rear tail-light lens
changing tyres
repairing tyre punctures
Driving hazards may include:
wet and iced roads
oil on road
animals and objects on road
fire in vehicle
leaking fuel
faulty brakes
parked vehicles on the road
faulty steering mechanism on vehicle
pedestrians crossing the road
flooded sections of road
windy sections of road
foggy conditions
worksite hazards, including:
power and service lines
buildings, structures and facilities
underground services
uneven or unstable ground and recently filled trenches
stationary and moving machinery and equipment
hazardous or dangerous materials
noise and light
energy sources
people on worksite
obstructions
Factors that can cause traffic delays and diversions may include:
traffic accidents
flooded sections of road
road damage
bridge or tunnel damage
road works
building construction
emergency situations, such as bushfires or building fires
road closures for special events, such as for marches, parades and sporting events
holiday traffic
road closures for utility works, such as electricity, water, sewerage, telecommunications and gas
road and load restrictions
bridge heights
Depending on the type of organisation concerned and the local terminology used, workplace procedures may include:
company procedures
enterprise procedures
organisational procedures
established procedures
Documentation and records may include:
state and territory heavy combination vehicle driving licence or permit requirements
state and territory road rules
load sheets
workplace driving instructions and procedures
vehicle manufacturer instructions, specifications and recommended driving procedures, including pre-operational checks of vehicle
emergency procedures
vehicle work diary or record book, where required
Applicable procedures and codes may include:
relevant state and territory:
roads and traffic authority driving regulations and licence requirements pertaining to agitator vehicles
road rules
permit regulations and requirements
OH&S legislation
fatigue management regulations
environmental protection legislation
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance.
Pre-operational checks may include:
visual check of vehicle
checking and topping up fluid levels
checking:
tyre pressures
operation of vehicle lights and indicators
brakes
wheel nuts
barrel functions
emergency stops
radio functions
Communication includes:
constant communication with:
relevant authority on site
customers
batcher
Personal safety measures include:
manual-lifting techniques
three points of contact when using ladders
correct use of safety rails and walkways
safety glasses
safety footwear
hard hats
high visibility clothing
hearing protection
Concrete discharge methods include:
concrete pump
wheelbarrow
kibble
Ancillary equipment includes:
hoses
chutes
remote control
ladders
chute locks
Minor routine repairs may include:
replacing:
blown globes in vehicle lights
broken fanbelts
blown fuses
door mirrors
broken coolant hoses
repairs to rear tail-light lens
changing tyres
repairing tyre punctures
Driving hazards may include:
wet and iced roads
oil on road
animals and objects on road
fire in vehicle
leaking fuel
faulty brakes
parked vehicles on the road
faulty steering mechanism on vehicle
pedestrians crossing the road
flooded sections of road
windy sections of road
foggy conditions
worksite hazards, including:
power and service lines
buildings, structures and facilities
underground services
uneven or unstable ground and recently filled trenches
stationary and moving machinery and equipment
hazardous or dangerous materials
noise and light
energy sources
people on worksite
obstructions
Factors that can cause traffic delays and diversions may include:
traffic accidents
flooded sections of road
road damage
bridge or tunnel damage
road works
building construction
emergency situations, such as bushfires or building fires
road closures for special events, such as for marches, parades and sporting events
holiday traffic
road closures for utility works, such as electricity, water, sewerage, telecommunications and gas
road and load restrictions
bridge heights
Depending on the type of organisation concerned and the local terminology used, workplace procedures may include:
company procedures
enterprise procedures
organisational procedures
established procedures
Documentation and records may include:
state and territory heavy combination vehicle driving licence or permit requirements
state and territory road rules
load sheets
workplace driving instructions and procedures
vehicle manufacturer instructions, specifications and recommended driving procedures, including pre-operational checks of vehicle
emergency procedures
vehicle work diary or record book, where required
Applicable procedures and codes may include:
relevant state and territory:
roads and traffic authority driving regulations and licence requirements pertaining to agitator vehicles
road rules
permit regulations and requirements
OH&S legislation
fatigue management regulations
environmental protection legislation
EVIDENCE GUIDE
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required knowledge and skills, the range statement and the assessment guidelines for this Training Package.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
The evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria of this unit and include demonstration of:
knowledge of relevant regulations and workplace procedures
correct positioning and charging of agitator
operating an agitator and ancillary equipment
adjusting slump of concrete to meet customer requirements
conducting pre-site checks of worksites
using PPE
discharging the concrete using the following four methods: concrete pump, wheelbarrow, kibble and chutes
cleaning vehicle to required company and regulatory standard
Context of and specific resources for assessment
Assessment must ensure access to:
agitator vehicle that is consistent with current industry standards
tools, equipment and PPE currently used in the concrete industry
regulatory requirements and equipment documentation that impact on work activities currently used in the concrete industry
Method of assessment
Holistic assessment with other units relevant to the industry sector, workplace and job role is recommended
In all cases where practical assessment is used it will be combined with targeted questioning to assess required knowledge
Assessment processes and techniques must be appropriate to the language and literacy capacity of the candidate and the work being performed
Simulation and online assessment are not suitable for final assessment of this unit
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required knowledge and skills, the range statement and the assessment guidelines for this Training Package.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
The evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria of this unit and include demonstration of:
knowledge of relevant regulations and workplace procedures
correct positioning and charging of agitator
operating an agitator and ancillary equipment
adjusting slump of concrete to meet customer requirements
conducting pre-site checks of worksites
using PPE
discharging the concrete using the following four methods: concrete pump, wheelbarrow, kibble and chutes
cleaning vehicle to required company and regulatory standard
Context of and specific resources for assessment
Assessment must ensure access to:
agitator vehicle that is consistent with current industry standards
tools, equipment and PPE currently used in the concrete industry
regulatory requirements and equipment documentation that impact on work activities currently used in the concrete industry
Method of assessment
Holistic assessment with other units relevant to the industry sector, workplace and job role is recommended
In all cases where practical assessment is used it will be combined with targeted questioning to assess required knowledge
Assessment processes and techniques must be appropriate to the language and literacy capacity of the candidate and the work being performed
Simulation and online assessment are not suitable for final assessment of this unit
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| AWM88 | TLIC3071 | Operate an agitator | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| W921 | TLI31210 | Certificate III in Driving Operations | Qualification |