Unit of competency Outline

Date retreived
22/07/2026 6:07 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Cut printed materials by machine

Cut printed materials by machine

Unit of competency
National Code
LMTFP2003B
State Code
W7272
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
16/07/2011
View on TGA
State Implementation and Classification
Approved Date
20/10/2014
Field of Education
030109 - Footwear Making
Original Release Date
20/10/2014
Nominal Hours
40
Description
This unit covers the skills and knowledge to cut uniform synthetics and printed leathers using machines, knives and interlocking knives.
Notes
Elements and Performance Criteria
1 Assess different qualities and types of materials
  • 1.1 Materials are assessed against job specifications.
  • 1.2 Various types and finishes of materials are checked according to work ticket.
  • 1.3 Materials are sorted according to colour and shade and other specifications.
2 Start up, shut down, adjust and carry out minor maintenance with safety
  • 2.1 Machines are started up and shut down according to safety regulations.
  • 2.2 Cutting board is regularly cleaned, turned and maintained.
  • 2.3 Striker plate is regularly checked for distortion and damage and irregularities reported.
3 Cut linings and components from materials by press or hand
  • 3.1 Knives are selected according to job specifications and size requirements and used according to OHS practices.
  • 3.2 Pressures on press are adjusted to knife sizes and shapes.
  • 3.3 Work ticket specifications are followed according to pairs and pieces.
  • 3.4 Parts are cut to workplace quality standards in relation to materials flaws.
  • 3.5 Individual pairs are selected, colour and grain matched to workplace quality standards.
  • 3.6 Pairs are cut to achieve best yield according to appropriate allowance.
  • 3.7 Distortions and defects on press cutting knives, dies and cutting boards are identified and appropriate action taken.
  • 3.8 Work is carried out according to OHS practices.
4 Check finished product
  • 4.1 Finished product is checked against workplace quality standards.
  • 4.2 Faults are addressed.
RANGE STATEMENT
The Range Statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the Performance Criteria, is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs if the candidate, accessibility of the item, and local industry and regional contexts.
Legislative/regulatory requirements
All work must comply with relevant Federal and State or Territory legislative or regulatory requirements.
Materials may include:
leather or synthetic materials that have been treated or printed to achieve a uniform finish
Machines may include:
swing beam press
full beam press
travelling head press
automated press
Knives may include:
clicking knives
cutting knives
interlocking knives
OHS practices
OHS practices include hazard identification and control, risk assessment and implementation of risk reduction measures specific to the tasks described by this unit, and may relate to:
manual handling techniques
standard operating procedures
personal protective equipment
safe materials handling
taking of rest breaks
ergonomic arrangement of workplaces
following marked walkways
safe storage of equipment
housekeeping
reporting accidents and incidents
environmental practices
The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for the Training Package.

Critical aspects of evidence
Demonstrates skills and knowledge to:
check work against specifications and workplace standards
prepare workstation and work before commencing operations
apply cutting techniques
apply OHS practices in work operations
maintain accurate records

Consistency in performance
Consistently applies skills and knowledge when:
organising work
completing tasks according to instructions
working systematically with attention to detail
identifying improvements and avoiding damage
using workplace practices
using OHS practices
recording and reporting accidents and incidents
assessing operational readiness of equipment
recognising and adapting to cultural differences in the workplace, including modes of behaviour and interactions

Resource implications
Access is required to real or appropriately simulated situations, including work areas, materials and equipment, and to information on workplace practices and OHS practices.

Context for assessment
Assessment may occur on the job or in an appropriately simulated environment.

Interdependent assessment
This unit may be assessed independently or in combination with other relevant units.
Replaces
State Code National Code Title Type
AXP50 LMTPRFT01AA Cut by machine - 1 Unit of competency
W6565 LMTFP2003A Cut printed materials by machine Unit of competency
Replaced By
State Code National Code Title Type
BAW40 MSTFP2003 Cut printed materials by machine Unit of competency