Unit of competency Outline

Date retreived
23/07/2026 5:01 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Operate four wheel drive vehicle in a towing situation

Operate four wheel drive vehicle in a towing situation

Unit of competency
National Code
FWPCOT3328
State Code
ODS11
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
28/01/2022
View on TGA
State Implementation and Classification
Approved Date
21/06/2022
Field of Education
030515 - Automotive Vehicle Operations
Original Release Date
21/06/2022
Nominal Hours
25
Description
This unit of competency describes the skills and knowledge required to tow a trailer using a four wheel drive vehicle. The unit applies to individuals who operate four wheel drive vehicles in towing situations in a variety of work settings and industry sectors, including forestry, agriculture, construction, tourism and energy.All work must be carried out to comply with workplace procedures, according to state/territory health and safety regulations, legislation and standards that apply to the workplace. Individuals must hold a driver licence or a provisional driver licence prior to commencing this unit of competency.
Notes
Elements and Performance Criteria
1. Prepare for towing
  • 1.1 Confirm four wheel drive vehicle is operational, appropriate for the conditions and has the required towing capacity
  • 1.2 Check trailer compliance with safety regulatory requirements
  • 1.3 Check condition of trailer, suitability of trailer and coupling for use on rough terrain and braking system of trailer if required
  • 1.4 Check compatibility of trailer and four wheel drive vehicle for towing operations, including ground clearance and GCM (Gross Combined Mass) of trailer and vehicle
  • 1.5 Inspect and secure load onto trailer in accordance with safety and regulatory requirements
  • 1.6 Identify and follow safety, environmental and legal requirements relevant to towing a trailer with a four wheel drive vehicle
  • 1.7 Identify, fit and use suitable personal protective equipment
  • 1.8 Identify, select and check serviceability and rating of equipment required to carry out towing operations
  • 1.9 Identify, assess and take actions to mitigate risks and hazards associated with towing operations
2. Use four wheel drive vehicle to tow a trailer
  • 2.1 Couple and uncouple trailer in accordance with safety requirements
  • 2.2 Apply safe four wheel driving skills while towing a trailer on sealed and unsealed road conditions
  • 2.3 Demonstrate safe braking procedures while towing a trailer on sealed and unsealed road conditions, including performing emergency stop
  • 2.4 Park four wheel drive vehicle and trailer
3. Perform post-towing tasks
  • 3.1 Carry out inspection of vehicle and equipment following the towing operation
  • 3.2 Record and report activity and damage to vehicle or equipment as required
No information
No information
Replaces
State Code National Code Title Type
AXK61 FWPFGM3214 Operate a four wheel drive in a towing situation Unit of competency