Unit of competency Outline

Date retreived
22/07/2026 7:49 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Carry out basic welding, brazing, cutting and machining operations on a coastal vessel

Carry out basic welding, brazing, cutting and machining operations on a coastal vessel

Unit of competency
National Code
MARB034
State Code
OCH21
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
22/11/2024
View on TGA
State Implementation and Classification
Approved Date
09/04/2021
Field of Education
030711 - Boilermaking And Welding
Original Release Date
09/04/2021
Nominal Hours
70
Description
Notes
Elements and Performance Criteria
1 Carry out basic welding tasks
  • 1.1 Requirements for welding tasks are correctly interpreted from work instructions
  • 1.2 Parts are prepared for welding according to established practice
  • 1.3 Parts are welded according to established practice and work requirements
  • 1.4 Weld defects are identified and appropriate actions taken according to established practice and operating procedures
  • 1.5 Flame gouging methods are used to remove plate and weld material according to established practice and operating procedures
  • 1.6 Finished work is checked against work instructions for accuracy and quality
2 Carry out basic brazing tasks
  • 2.1 Requirements for brazing tasks are correctly interpreted from work instructions
  • 2.2 Parts are prepared for brazing according to established practice and work requirements
  • 2.3 Brazing equipment is prepared for brazing operations according to established procedures
  • 2.4 Parts are brazed using established procedures
  • 2.5 Finished work is checked against work instructions for accuracy and quality
3 Carry out basic cutting tasks
  • 3.1 Instructions are reviewed, and required size and shape of cut work is correctly identified and interpreted
  • 3.2 Work is correctly marked out in preparation for cutting according to established practice and operating procedures
  • 3.3 Thermal cutting plant and equipment is set up according to established procedures
  • 3.4 Steel plate and/or rolled sections are cut to shape and size according to established practice and operating procedures
  • 3.5 Finished work is checked against work instructions for accuracy and quality according to operating procedures
4 Carry out basic machining tasks
  • 4.1 Requirements for basic machining tasks are correctly interpreted from work instructions according to operating procedures
  • 4.2 Work is correctly marked out in preparation for basic machining according to established practice and operating procedures
  • 4.3 Machine is set up according to established procedures
  • 4.4 Machining is carried out according to established procedures
  • 4.5 Finished work is checked against work instructions for accuracy and quality according to operating procedures
5 Follow safety and hazard control procedures
  • 5.1 Required safety precautions and regulations are followed when carrying out basic welding
  • 5.2 Operational hazards are identified and actions are taken to eliminate or, where elimination is not possible, to minimise, risk to personnel
No information
No information
Replaces
State Code National Code Title Type
WH801 MARB008 Carry out basic welding, brazing, cutting and machining operations on a coastal vessel Unit of competency