Unit of competency Outline

Date retreived
22/07/2026 4:12 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Operate 4x4 vehicle

Operate 4x4 vehicle

Unit of competency
National Code
FPICOT2234B
State Code
D5911
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
20/05/2011
View on TGA
State Implementation and Classification
Approved Date
18/06/2014
Field of Education
030515 - Automotive Vehicle Operations
Original Release Date
18/06/2014
Nominal Hours
30
Description
This unit describes the outcomes required to operate a 4x4 vehicle safely in a range of conditions, including on normal roads, traversing slopes, ascending and descending steep slopes, and stall recovery Compliance with licensing, legislative, regulatory or certification requirements may be required in various jurisdictionsThis unit replaces FPICOT2234A Operate 4x4 vehicle
Notes
Elements and Performance Criteria
1. Prepare for 4x4 operations
  • 1.1. Applicable occupational health and safety (OHS), environmental, legislative and organisational requirements relevant to operating a 4x4 vehicle are identified and followed
  • 1.2. Pre-start checks of 4x4 vehicle and equipment are carried out in line with manufacturer specifications and roadworthy requirements
  • 1.3. Tyres are checked for pressure suitable for terrain and changed as required in line with organisational procedures
  • 1.4. Loads are secured in line with organisational and legislative requirements
  • 1.5. Communication with others is established and maintained in line with OHS requirements
2. Operate 4x4 vehicle
  • 2.1. Intended vehicle path is inspected for potential hazards and risks prior to negotiation in line with OHS and environmental requirements
  • 2.2. 4x4 vehicle is driven on and off-road at speeds appropriate for conditions in line with organisational and legislative requirements, and environmental regulations
  • 2.3. 4x4 vehicle is parked and shut down in line with manufacturer specifications and organisational requirements
  • 2.4. 4x4 vehicle and equipment are cleaned and stored after use in line with manufacturer specifications and organisational procedures
3. Operate 4x4 vehicle on a steep slope
  • 3.1. Intended 4x4 vehicle path is inspected prior to negotiation of slope
  • 3.2. Appropriate gear is selected to negotiate grade and engine revolutions are maintained to ensure constant traction
  • 3.3. Airconditioning unit is turned off to avoid engine acceleration
  • 3.4. Braking is used to control descent/ascent and skidding is avoided through application of brakes to emulate ABS
  • 3.5. Traction is maintained in line with requirements of 4x4 vehicle and surrounding terrain
No information
No information
Replaces
State Code National Code Title Type
S4588 FPICOT2234A Operate 4x4 vehicle Unit of competency
Replaced By
State Code National Code Title Type
WF822 FPICOT3259 Operate a four wheel drive on unsealed roads Unit of competency