Unit of competency Outline

Date retreived
22/07/2026 7:03 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Perform complex tests to measure chemical properties of materials

Perform complex tests to measure chemical properties of materials

Unit of competency
National Code
MSL975018
State Code
AWN78
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
01/03/2016
View on TGA
State Implementation and Classification
Approved Date
16/08/2016
Field of Education
019909 - Laboratory Technology
Original Release Date
16/08/2016
Nominal Hours
120
Description
This unit of competency covers the ability to isolate analytes from complex matrices and perform multi-staged and multi-component analyses on them. The unit requires personnel to apply detailed knowledge of analytical chemistry to plan the analysis, prepare and measure samples, analyse and report results and make approved adjustments to procedures as required. Personnel are required to recognise atypical test data and results and troubleshoot common analytical procedure and equipment problems.This unit of competency is applicable to technical working in all industry sectors. All operations must comply with relevant standards, appropriate procedures and workplace requirements. Although a supervisor may not always be present, the technician will follow standard operating procedures (SOPs) that clearly describe the scope of permitted practice, including varying workplace/test procedures and communicating results to people outside the laboratory.While no specific licensing or certification requirements apply to this unit at the time of publication, laboratory operations are governed by relevant legislation, regulations and/or external accreditation requirements. Local requirements should be checked.
Notes
Elements and Performance Criteria
1 Develop an analysis plan with supervisor
  • 1.1 Liaise with client or sample provider to determine test requirements and sample characteristics
  • 1.2 Record sample description, compare with specification, record and report discrepancies
  • 1.3 Confirm suitable sample preparation methods, quantification and analytical techniques with supervisor
  • 1.4 Schedule analysis using workplace procedures
2 Reduce the complexity of the sample
  • 2.1 Obtain a representative analytical portion of the laboratory sample
  • 2.2 Prepare validation checks for analytical portions
  • 2.3 Use workplace procedures to simplify the sample matrix
  • 2.4 Conduct tests to ensure that sample preparation is complete
3 Apply quantification method
  • 3.1 Add modifiers to remove/minimise interferences
  • 3.2 Conduct preliminary analysis to estimate analyte concentration
  • 3.3 Match the concentration of analyte in the sample with the working range of the instrument
  • 3.4 Prepare calibration standards to suit quantification method
4 Perform analysis
  • 4.1 Set up and optimise instruments to suit sample/test requirements
  • 4.2 Measure analyte response for standards, validation checks and samples
  • 4.3 Conduct sufficient measurements to obtain reliable data
  • 4.4 Return instruments to standby or shutdown condition as required
5 Process and analyse data
  • 5.1 Confirm data is the result of valid measurements
  • 5.2 Perform required calculations and ensure results are consistent with estimations and expectations
  • 5.3 Record results with the appropriate accuracy, precision units and uncertainty
  • 5.4 Analyse trends in data and/or results and report out-of-specification or atypical results promptly to appropriate personnel
  • 5.5 Troubleshoot analytical procedure or equipment problems which have led to atypical data or results
6 Maintain a safe work environment
  • 6.1 Identify risks/hazards, safety equipment and control measures associated with sample handling, preparation and test methods
  • 6.2 Use personal protective equipment (PPE) and safety procedures as specified for test method and materials to be tested
  • 6.3 Minimise the generation of waste and environmental impact
  • 6.4 Ensure the safe disposal of laboratory waste
  • 6.5 Clean, care for and store equipment and consumables in accordance with workplace procedures
7 Maintain laboratory records
  • 7.1 Enter approved data and results into laboratory information management system (LIMS)
  • 7.2 Maintain security, integrity and traceability of samples and documentation
  • 7.3 Maintain equipment and logs in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WA747 MSL975018A Perform complex tests to measure chemical properties of materials Unit of competency
Replaced By
State Code National Code Title Type
OAC13 MSL975046 Perform complex tests to measure chemical properties of materials Unit of competency