Unit of competency Outline

Date retreived
22/07/2026 6:31 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Operate a firing kiln

Operate a firing kiln

Unit of competency
National Code
MSMPMC311
State Code
OAF13
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
22/10/2018
View on TGA
State Implementation and Classification
Approved Date
21/05/2019
Field of Education
030717 - Plant And Machine Operations
Original Release Date
21/05/2019
Nominal Hours
30
Description
This unit describes the skills and knowledge required to operate a firing kiln and ancillary equipment. It applies to both large production and smaller craft contexts. This unit applies to operators who are required to take responsibility for own outputs and follow established procedures to prepare the firing equipment, load and stack products and monitor and adjust kiln operation. Operators are also required to work autonomously and apply their own judgement to interpret information; monitor processes; identify and address routine and non-routine problems and control hazards. This unit does not apply to forming or drying prior to firing or finishing or operation of rotary kilns.This unit applies to an individual working alone or as part of a team or group and in liaison with other shift team members, team leader and supervisor. No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Prepare the firing equipment
  • 1.1 Determine the firing requirements from the production program
  • 1.2 Identify and set up the kiln cars or furniture
  • 1.3 Check kiln refractories are within specifications, including kiln cars, kiln lining and refractories at burners
  • 1.4 Check the firing equipment is safe to use
  • 1.5 Check for fuel feed obstructions and clear burner pathways
2. Load kiln and monitor operation
  • 2.1 Use kiln space efficiently to set or stack products to specification
  • 2.2 Use correct stacking pattern and allow adequate spacing around each item
  • 2.3 Monitor kiln firing to ensure temperature rise and fall rate is to specification
  • 2.4 Monitor and record kiln car movement or kiln contents
  • 2.5 Monitor and adjust kiln heating equipment (elements or burners) and record temperature gradient details
  • 2.6 Monitor the kiln atmosphere
  • 2.7 Monitor for correct operation of kiln
  • 2.8 Move kiln car or kiln contents to the appropriate storage area
  • 2.9 Check and record condition of products leaving the kiln
3. Rectify routine problems
  • 3.1 Identify and rectify faults and equipment failure
  • 3.2 Maintain records and log books of equipment operations
  • 3.3 Identify non-routine problems and report to designated person
4. Control hazards
  • 4.1 Identify hazards in kiln work area
  • 4.2 Assess the risks arising from those hazards
  • 4.3 Implement measures to control those risks
No information
No information
Replaces
State Code National Code Title Type
BAH60 PMC552030 Operate a firing kiln Unit of competency