Unit of competency Outline

Date retreived
22/07/2026 3:05 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Evaluate construction materials and methods for Class 2-9 buildings up to two storeys

Evaluate construction materials and methods for Class 2-9 buildings up to two storeys

Unit of competency
National Code
CPPBDN5105
State Code
OCU49
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
07/01/2021
View on TGA
State Implementation and Classification
Approved Date
16/04/2021
Field of Education
040303 - Building Construction Management
Original Release Date
16/04/2021
Nominal Hours
120
Description
This unit specifies the skills and knowledge required to evaluate traditional, contemporary and emerging construction materials and methods for the design of Class 2-9 buildings to a maximum floor area of 2000m2, except construction Type A buildings. It includes researching the application, performance and interaction of available construction materials and methods.Building classifications and construction types are set out in the National Construction Code (NCC).This unit is suitable for drafters and building designers who apply technical and theoretical knowledge and skills to building design work tasks.This unit forms part of the licensing requirements for people engaged in building design in some states and territories. For further information, check with the relevant regulatory authority.
Notes
Elements and Performance Criteria
1 Evaluate site preparation, foundations and footings.
  • 1.1 Read and interpret site classification reports to confirm foundation material and wind classification and identify implications for structural design.
  • 1.2 Investigate impact of earthworks and vegetation on adjoining land and existing structures.
  • 1.3 Investigate drainage provisions required to manage surface water and subsoil drainage, during and post construction works.
  • 1.4 Research and select termite risk management to suit regional characteristics.
  • 1.5 Determine articulation and shrinkage control measures for footing and slab construction.
  • 1.6 Analyse, sketch and annotate commonly used structural footing and floor systems, including on-grade and suspended.
2 Evaluate and report on construction methods and materials for framing, cladding and lining.
  • 2.1 Analyse, sketch and annotate commonly used structural wall and roof framing systems, including portal frames, bracing and tie-down.
  • 2.2 Analyse, sketch and annotate commonly used systems for structural concrete, including pre-cast and cast-in situ walls, floors and roofs.
  • 2.3 Analyse, sketch and annotate commonly used façade and glazing systems.
  • 2.4 Analyse, sketch and annotate commonly used roof cladding and drainage systems, including flashings.
  • 2.5 Investigate new and emerging construction materials, methods and systems.
  • 2.6 Select appropriate thermal and acoustic insulation systems for building envelope and occupancy separation for different usage classifications.
  • 2.7 Research, analyse and sketch commonly used lining systems.
  • 2.8 Analyse integration of construction materials and methods.
  • 2.9 Analyse structural implications for provision of services.
3 Evaluate and report on the impact of compliance requirements on structural elements.
  • 3.1 Research, analyse and report on fire resistant construction requirements relevant to scope of works, nature and use of building.
  • 3.2 Research, analyse and report on NCC requirements for access and egress relevant to scope of works, nature and use of building.
  • 3.3 Research, analyse and report on NCC requirements for health and amenity relevant to scope of works, nature and use of building.
  • 3.4 Research, analyse and report on NCC requirements for energy efficiency relevant to scope of works, nature and use of building.
4 Evaluate and report on internal fit-out of building.
  • 4.1 Research, analyse and sketch typical joinery components for commercial cabinetry and decorative finishes.
  • 4.2 Determine structural, environmental and services implications of placement and selection of internal fixtures, fittings and finishes.
5 Evaluate and report on services for building.
  • 5.1 Research installation methods for different types of services, components, and systems relevant to scope of works, nature and use of building.
  • 5.2 Research and report on NCC requirements for services and equipment relevant to scope of works, nature and use of building.
  • 5.3 Research and report on environmental impact and sustainability of systems and components for services relevant to scope of works, nature and use of building.
No information
No information
State Code National Code Title Type
BGI3 CPP50921 Diploma of Building Design Qualification