Unit of competency Outline

Date retreived
22/07/2026 9:46 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Sand cork flooring

Sand cork flooring

Unit of competency
National Code
MSFFL3097
State Code
OAJ32
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
03/12/2018
View on TGA
State Implementation and Classification
Approved Date
22/05/2019
Field of Education
040321 - Floor Coverings
Original Release Date
22/05/2019
Nominal Hours
20
Description
This unit describes the skills and knowledge required to prepare for work and sand either new cork flooring or re-sand existing cork flooring, where only minor rectification of scratches or wear and tear has occurred, or between coats. It involves operating floor sanding, rotary or orbital sanding and edge sanding machines.This unit applies to flooring technicians working in accordance with pre-determined work orders.Licensing, legislative or certification requirements may apply to this unit and relevant state/territory and local government agencies should be consulted to determine any necessary certification or licensing for undertaking flooring work. Access to construction sites requires certification of general induction training specified by the National Code of Practice for Induction for Construction Work (ASCC 2007).
Notes
Elements and Performance Criteria
1. Prepare for the work
  • 1.1 Identify and follow work health and safety, legislative and organisational requirements
  • 1.2 Read work documentation and identify job requirements
  • 1.3 Identify surface suitability for fine sanding based on contamination and moisture content inspection, and complete pre-sanding requirements
  • 1.4 Assess cork flooring condition and confirm the extent of sanding required to meet job specifications
  • 1.5 Select and check tools, equipment and materials for suitability, serviceability and safety prior to use
  • 1.6 Isolate and/or encapsulate the job site to contain dust fallout from sanding operation
  • 1.7 Plan sequence of work to ensure efficiency and quality of application
2. Conduct sanding operations
  • 2.1 Set up, check and adjust sanding equipment and safety features in accordance with manufacturer instructions
  • 2.2 Select and change equipment to meet requirements of the job
  • 2.3 Select, attach, routinely check and change sanding belts or papers to ensure quality finish
  • 2.4 Conduct trial runs to check machine operations and quality of finished work
  • 2.5 Complete sanding systematically and effectively within the minimum required timeframe
  • 2.6 Complete required routine lubrication and adjustments to the equipment
  • 2.7 Clean and check final finish against quality and job requirements and rectify deficiencies.
3. Complete housekeeping
  • 3.1 Store and recycle unused materials in accordance with workplace procedures
  • 3.2 Check, clean and store tools and equipment in accordance with workplace procedures
  • 3.3 Clean work area and dispose of rubbish safely
  • 3.4 Accurately complete required workplace documentation
No information
No information
Replaces
State Code National Code Title Type
WI401 MSFFL3044 Sand cork flooring Unit of competency
State Code National Code Title Type
BED0 MSF30818 Certificate III in Flooring Technology Qualification