Unit of competency Outline

Date retreived
23/07/2026 7:43 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Operate filament winding equipment

Operate filament winding equipment

Unit of competency
National Code
PMBPROD290
State Code
BAI92
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
22/06/2016
View on TGA
State Implementation and Classification
Approved Date
05/08/2016
Field of Education
030717 - Plant And Machine Operations
Original Release Date
05/08/2016
Nominal Hours
30
Description
This unit of competency covers the skills and knowledge required to operate filament winding equipment as used to manufacture filament wound composite products.This unit of competency applies to operators who are required to take product off the machine, check materials and moulds, operate the equipment, check product quality and conformity to specifications, and recognise routine and non-routine problems and take appropriate action.This unit of competency applies to an individual working alone or as part of a team or group and working in liaison with other shift team members, team leader and supervisor, as appropriate.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Conduct pre-operational checks as required
  • 1.1 Check safety equipment is in place and working
  • 1.2 Check moulds, closures and fitting to procedures
  • 1.3 Check moulds for cracks, chips marks and cleanliness
  • 1.4 Check materials, including fibres, resins, additives and release agents are correct
  • 1.5 Undertake other pre-operational checks in accordance with procedures
2 Operate equipment to procedures
  • 2.1 Check process is operating within required limits
  • 2.2 Check product is in specification and to required quality standard
  • 2.3 Collect products and store as required
  • 2.4 Maintain supply of materials as required
  • 2.5 Complete logs and records as required.
  • 2.6 Collect and segregate scrap, waste and other materials as required
  • 2.7 Keep equipment and work are clean
  • 2.8 Pause machine cycle and perform emergency stop as required
3 Respond to routine problems in accordance with procedures
  • 3.1 Recognise known faults that occur during the operation
  • 3.2 Identify and take action on causes of routine faults
  • 3.3 Log problems as required
  • 3.4 Identify non-routine problems and report to designated person
No information
No information
Replaces
State Code National Code Title Type
W7604 PMBPROD290B Operate filament winding equipment Unit of competency