Unit of competency Outline

Date retreived
22/07/2026 4:48 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Rig camera infrastructure

Rig camera infrastructure

Unit of competency
National Code
CUACAM302
State Code
AWJ76
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
15/01/2016
View on TGA
State Implementation and Classification
Approved Date
21/07/2016
Field of Education
100701 - Audio Visual Studies
Original Release Date
21/07/2016
Nominal Hours
30
Description
This unit describes the skills and knowledge required to install camera infrastructure for television and other relatively complex multi-camera productions such as live sport or entertainment events.It applies to individuals who work under supervision to rig cabling and dolly tracks according to predetermined camera plans.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for cable rigs
  • 1.1 Confirm cabling requirements for shoots with production personnel and select appropriate camera cables
  • 1.2 Repair minor cable faults safely and in line with manufacturer's instructions
  • 1.3 Refer complex repairs to technical specialists in line with enterprise procedures
  • 1.4 Complete workplace documentation in line with enterprise requirements
  • 1.5 Check camera cables are operational and ready for use on location
2. Rig camera cables
  • 2.1 Check available power source is appropriate
  • 2.2 Confirm cable points and cable runs from camera plans and other cabling information
  • 2.3 Establish cable points, runs and lengths to meet anticipated camera movements, taking care to minimise cable cross-overs
  • 2.4 Lay out excess cable to avoid knotting or twisting during use
  • 2.5 Run power cables from power source to cameras and other equipment
  • 2.6 Secure cables to avoid strain on plugs and sockets
  • 2.7 Complete cable routing and patching to camera control units, cable slinging and cable ramping safely, and in line with camera plans
  • 2.8 Check camera cables are run from correct outlet points to cameras and do not impede movement of cameras during shoots
  • 2.9 Check installed camera cables do not present a hazard to personnel involved in shoots or to the general public
3. Lay tracks for dolly mounts
  • 3.1 Position tracks according to production requirements and confirm final positioning with production staff
  • 3.2 Lay tracks safely, taking account of ground conditions and site safety plans
  • 3.3 Check tracks are placed without risk to production personnel, and are smooth, level and secure throughout their route
  • 3.4 Check tracks do not intrude on proposed shots and allow free movement of camera equipment and personnel
  • 3.5 Secure dolly to track and check fastenings
4. Disassemble camera cables and dolly tracks
  • 4.1 Break down cabling and coil or wind cables onto drums to avoid strain or damage
  • 4.2 Use safe lifting techniques when breaking down and carrying track equipment
  • 4.3 Report equipment damage to relevant production staff and complete required documentation
  • 4.4 Clean and safely pack equipment and prepare for transport
  • 4.5 Leave locations in original or improved condition
No information
No information
Replaces
State Code National Code Title Type
D1087 CUFCAM302A Rig camera infrastructure Unit of competency
Replaced By
State Code National Code Title Type
ODH96 CUACAM312 Rig camera infrastructure Unit of competency
State Code National Code Title Type
AZO4 CUA31015 Certificate III in Screen and Media Qualification