Unit of competency Outline

Date retreived
22/07/2026 4:27 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Cutover new systems and equipment on customer premises

Cutover new systems and equipment on customer premises

Unit of competency
National Code
ICTCBL312
State Code
AWE70
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
1.00
Current Release Date
14/01/2016
View on TGA
State Implementation and Classification
Approved Date
05/07/2016
Field of Education
031309 - Communications Equipment Installation And Maintenance
Original Release Date
05/07/2016
Nominal Hours
80
Description
This unit describes the skills and knowledge required to cutover new or upgraded systems and equipment on a customer premises. This may include indoor or outdoor installations of communications applications in telephony, broadband, data, video, radio frequency (RF) equipment, security and computer networks, including local area networks (LAN), wide area networks (WAN) and multimedia systems. It applies to telecommunications trade workers carrying out new or upgrades of domestic, commercial or industrial systems and equipment at a customer's premises.Work functions in the occupational areas where this unit may be used are subject to regulatory requirements. Refer to the Implementation Guide Companion Volume or the relevant regulator for specific guidance on requirements.
Notes
Elements and Performance Criteria
1. Prepare system and equipment cutover
  • 1.1 Obtain relevant legislation, codes, regulations and standards
  • 1.2 Scope work by obtaining project plan from appropriate personnel and arrange for site access to comply with security arrangements
  • 1.3 Notify appropriate personnel of identified safety hazards at worksite
  • 1.4 Determine cable route and type of cable and equipment from project plan, and identify and avoid other services
  • 1.5 Obtain plant, tools and safety equipment, and material to perform tasks safely and efficiently
  • 1.6 Prepare implementation plan with cutover tasks based on identified nature of job, and seek customer approval
  • 1.7 Notify customer and network carrier of proposed cutover details and arrange for customer representation
2. Cutover system or equipment into service
  • 2.1 Perform cutover tasks and connect network facilities according to approved plan, following health and safety and environmental requirements for given work
  • 2.2 Test all cable connections, equipment and facilities as instructed in technical manuals and specifications
  • 2.3 Evaluate test results to ensure proper system operation and performance, and rectify if required
3. Complete project documentation
  • 3.1 Record test results for future reference, complete reports on cutover installation and design amendments according to enterprise requirements
  • 3.2 Recover obsolete materials and equipment, and return to appropriate point for disposal
  • 3.3 Restore siteaccording to requirements of enterprise or approving authority and to customer satisfaction
  • 3.4 Notify appropriate personnel of job completion and obtain sign off
No information
No information
Replaces
State Code National Code Title Type
D3329 ICTCBL3052A Cut over new systems and equipment on customer premises Unit of competency
Replaced By
State Code National Code Title Type
OBA64 ICTCBL324 Cut over new systems and equipment on customer premises Unit of competency