Construct decorative brickwork

Unit of competency Outline

Date retreived
22/07/2026 12:35 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Unit of competency

National Code
CPCCBL3015

State Code
OCO57

TGA Status
Current

DTWD Status
Approved

Current Release Number
3.00

Current Release Date
24/12/2024

View on TGA

State Implementation and Classification

Approved Date

01/06/2021

Field of Education

040309 - Bricklaying And Stonemasonry

Original Release Date

01/06/2021

Nominal Hours

Description

This unit specifies the skills and knowledge required to construct decorative brickwork. It applies to bricklayers and block layers who work on new and existing structures. This unit is suitable for people operating with some autonomy. A person working at this level would be expected to take responsibility for organising and completing tasks assigned to them without needing close supervision.Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001Prepare to work safely in the construction industrymeets this requirement.No licensing, legislative or certification requirements apply to this unit at the time of publication.

Notes

Elements and Performance Criteria

1 Prepare for work.

1.1 Select, fit correctly and use personal protective equipment (PPE) appropriate for job.
1.2 Read, interpret and apply decorative brick construction requirements from current plans, specifications, standards and codes.
1.3 Follow requirements in workplace safety and environmental documentation and workplace procedures.
1.4 Use measurements and apply formulas to calculate material quantities.
1.5 Determine job priorities and sequence job tasks in consultation with others on site.
1.6 Identify potential hazards and determine and implement control measures.
1.7 Select and check condition of plant, equipment and tools and report damage or malfunction to relevant personnel.
1.8 Check conformity of materials against the specifications and place materials in preparation for the work.

2 Set out and prepare for decorative brickwork.

2.1 Identify structural and design details of decorative brickwork and panels from plans and specifications.
2.2 Locate position and set out specified design.
2.3 Determine batch proportions, mortar colour, joint size and profile, method of tying and damp proofing.
2.4 Select and sort bricks for appearance, dimensions, colour variations, durability and damage.
2.5 Batch and mix mortar ensuring consistency with job requirements.

3 Lay decorative brickwork.

3.1 Lay corbel to form feature protrusions adhering to the overhang specifications and maintaining level, bond and gauge.
3.2 Form a protruding plinth and sill using plinth bricks.
3.3 Create a dentil course using standard bricks.
3.4 Create a dogtooth pattern using standard bricks.
3.5 Lay decorative brickwork panel using accurate cuts and maintaining bond and gauge consistency.
3.6 Rake or rule joints to specified profile and depth.
3.7 Brush down face of brickwork/blockwork prior to drying to remove unwanted mortar.

4 Clean up.

4.1 Clear the work area, and dispose of, reuse or recycle materials following workplace and environmental requirements.
4.2 Clean tools and equipment, check for serviceability and report damage or faults.
4.3 Store and secure tools and equipment following workplace procedures.

No information

Replaces

State Code	National Code	Title	Type
W9334	CPCCBL3015A	Construct decorative brickwork	Unit of competency

State Code	National Code	Title	Type
BGD8	CPC33020	Certificate III in Bricklaying and Blocklaying	Qualification