Unit of competency Outline

Date retreived
23/07/2026 11:36 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Operate small open cut mine equipment

Operate small open cut mine equipment

Unit of competency
National Code
RIIMPO314D
State Code
WH419
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
5.00
Current Release Date
14/12/2015
View on TGA
State Implementation and Classification
Approved Date
29/05/2014
Field of Education
030717 - Plant And Machine Operations
Original Release Date
29/05/2014
Nominal Hours
40
Description
This unit describes a participant’s skills and knowledge required to operate small open cut mine equipment in Metalliferous mining.This unit is appropriate for those working in operational roles.Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and Industry sectors. Relevant information must be sourced prior to application of the unit.
Notes
Elements and Performance Criteria
1. Plan and prepare for small open cut mine equipment operations
  • 1.1 Access, interpret and apply small open cut mine equipment documentation and ensure the work activity is compliant
  • 1.2 Obtain, read, interpret, clarify and confirm work requirements
  • 1.3 Identify and address risks, hazards and environmental issues and implement control measures
  • 1.4 Select and wear personal protective equipment appropriate for work activities
  • 1.5 Access, interpret and apply geological and survey data required to complete the allocated work
  • 1.6 Inspect and prepare work area in coordination with others
  • 1.7 Select, and check for faults, equipment and/or attachments for work activities
  • 1.8 Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency
2. Operate small open cut mine equipment
  • 2.1 Coordinate activities with others at the site prior to commencement of, and during, the work activity
  • 2.2 Carry out pre-start, start-up, park-up, shutdown and equipment security procedures
  • 2.3 Drive and operate equipment, and modify the operating technique to meet changing work conditions
  • 2.4 Change and operate ancillary attachments to the support equipment
  • 2.5 Operate support equipment with and without ancillary attachments, within the equipment limitations
  • 2.6 monitor hazards and risks , and ensure safety of self, other personnel, plant and equipment
  • 2.7 Complete work plan within the operating capacity of the equipment
3. Carry out operator maintenance
  • 3.1 Prepare machine for maintenance
  • 3.2 Conduct inspection and fault finding
  • 3.3 Carry out scheduled maintenance tasks
  • 3.4 Return machine to service
  • 3.5 Process written maintenance records
4. Conduct housekeeping activities
  • 4.1 Clear work area and dispose of or recycle materials
  • 4.2 Clean and maintain condition of equipment, ensure suitability for use, and address/report issues
  • 4.3 Process records
No information
No information
Replaces
State Code National Code Title Type
WB333 RIIMPO314A Operate small open cut mine equipment Unit of competency
Replaced By
State Code National Code Title Type
OAK68 RIIMPO314E Operate small open cut mine equipment Unit of competency