Unit of competency Outline

Date retreived
22/07/2026 4:13 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Transport forestry produce using trucks

Transport forestry produce using trucks

Unit of competency
National Code
FWPCOT3262
State Code
AXL01
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
13/05/2016
View on TGA
State Implementation and Classification
Approved Date
05/10/2016
Field of Education
030515 - Automotive Vehicle Operations
Original Release Date
05/10/2016
Nominal Hours
40
Description
This unit of competency describes the outcomes required to drive trucks to and from forestry harvesting sites, facilitate loading and unloading, and deliver forestry produce to its destination. Produce could include bark, wood shavings, wood chips and biofuel materials. Work is completed in in a variety of work settings, including forest environments, log dumps, saw mills, wood chip mills, veneer mills, board/plywood mills.The unit applies to those who transport forestry produce by driving heavy vehicles.Licensing, legislative, regulatory, or certification requirements apply to this unit in some states and territories at the time of publication, and may differ according to jurisdiction.
Notes
Elements and Performance Criteria
1. Prepare to transport forestry produce
  • 1.1 Review work order and schedules and where required check with appropriate personnel.
  • 1.2 Identify harvesting sites, obtain coupe map and determine truck access.
  • 1.3 Determine required truck configuration to meet work order and load requirements and confirm availability of truck and ancillary equipment.
  • 1.4 Check transportation documentation for compliance with regulatory requirements for driving hours, load limits and dimensions.
2. Plan route
  • 2.1 Obtain coupe map to select route and coupe entry and exits points ensuring efficient, safe and legal produce movement and minimal environmental damage.
  • 2.2 Ensure selected route complies with height, width and load limits of road infrastructure and environmental constraints.
  • 2.3 Estimate time required to transport produce and account for fatigue management guidelines.
  • 2.4 Confirm route, timings and coupe entry and exit points with appropriate personnel.
3. Load forestry produce
  • 3.1 Access site and determine safe manoeuvring approach for loading area with worksite personnel.
  • 3.2 Position truck to avoid site and equipment hazards and to maximise load safety and security while loading.
  • 3.3 Communicate with worksite personnel and machine operators to ensure safe loading location and processes and that load meets transport regulatory requirements.
  • 3.4 Monitor loading and complete final check to ensure safe transport.
  • 3.5 Secure load with sufficient number and type of securing devices in line with loading guidelines and transport regulatory requirements.
4. Transport forestry produce
  • 4.1 Transport forestry produce on planned or modified route considering conditions, road surfaces and fatigue management practices.
  • 4.2 Monitor condition of tracks and roads and report unexpected ground, water, vegetation and other environmental conditions to appropriate personnel
  • 4.3 Drive truck legally and safely using primary and subsidiary controls appropriate to conditions.
  • 4.4 Monitor truck gauges and warning devices to detect and respond to operating faults and ensure operational safety.
  • 4.5 Communicate with other drivers and road users to inform location and potential hazards.
  • 4.6 Conduct periodic load safety checks and realign load in line with road conditions and regulatory requirements.
  • 4.7 Keep communication channels open to ensure location is known at all times to allow for emergency assistance.
5. Unload forestry produce
  • 5.1 Complete site inductions and establish safe manoeuvring approach for unloading area with worksite personnel.
  • 5.2 Follow site personnel directions to manoeuvre and park truck to avoid site and equipment hazards.
  • 5.3 Shut down and secure truck in identified safe unloading zone.
  • 5.4 Release load securing devices and unload forestry produce in line with site safe unloading procedures.
  • 5.5 Make truck, trailer and ancillary equipment safe for return journey to coupe.
  • 5.6 Record and report forestry produce shifting process and truck operating faults to appropriate personnel.
No information
No information
Replaces
State Code National Code Title Type
WG889 FPICOT3262 Transport forestry produce using trucks Unit of competency
Replaced By
State Code National Code Title Type
OCR56 FWPCOT3316 Transport forestry produce using trucks Unit of competency