Unit of competency Outline

Date retreived
22/07/2026 4:01 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Assemble, mount and connect control gear and switchgear

Assemble, mount and connect control gear and switchgear

Unit of competency
National Code
UEEAS0007
State Code
OCA13
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
29/11/2024
View on TGA
State Implementation and Classification
Approved Date
12/07/2021
Field of Education
031317 - Electronic Equipment Servicing
Original Release Date
12/07/2021
Nominal Hours
36
Description
This unit involves the skills and knowledge required to assemble, mount and connect control gear and switchgear, including the interconnections within a switchboard enclosure intended to operate at voltages up to 1,000 volts (V) alternating current (a.c.) or 1,500 V direct current (d.c.). It includes working safely; following standards, specifications and component manufacturer requirements; matching equipment with that specified; terminating cables; connecting wiring and completing necessary documentation.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Plan to assemble, mount and connect control gear and switchgear
  • 1.1 Switchgear and control gear assembly installation is determined and planned in accordance with job specifications, wiring and schematic diagrams
  • 1.2 Work health and safety (WHS)/occupational health and safety (OHS) requirements and workplace procedures for a given work area are identified and applied
  • 1.3 Work instructions, including layout and wiring diagrams, are applied in accordance with workplace procedures
  • 1.4 Advice is sought from supervisor to ensure work is coordinated effectively with relevant person/s
  • 1.5 Materials required for the control gear and switchgear installation work are obtained in accordance with workplace procedures
  • 1.6 Tools, equipment and measuring devices required to carry out work are obtained and checked for correct operation and safety
2 Assemble, mount and connect control gear and switchgear
  • 2.1 Switchgear and control gear assembly hazards are identified, risks assessed and control measures are implemented in accordance with workplace procedures
  • 2.2 Circuits are checked and isolated in accordance with WHS/OHS workplace requirements and procedures
  • 2.3 Component layout is in accordance with job specifications, wiring and schematic diagrams
  • 2.4 Switchgear/control gear is fitted in accordance with work instructions, industry standards, manufacturer specifications and workplace procedures
  • 2.5 Interconnections are made in accordance with work instructions, industry standards and workplace procedures
  • 2.6 Regular quality checks are carried out in accordance with workplace procedures
  • 2.7 Completed switchboard function is tested in accordance with workplace procedures, industry standards and manufacturer specifications
  • 2.8 Labelling and numbering cable are undertaken in accordance with industry standards, wiring and schematic diagrams
  • 2.9 Unplanned events are referred to supervisor for directions in accordance with workplace procedures
  • 2.10 Assembly work is carried out without waste of materials or damage to apparatus, the surrounding environment or services and using sustainable energy practices
3 Finalise and inspect assembled control gear and switchgear installation
  • 3.1 Assembled switchboard panel is visually inspected and checked against work instructions, industry standards and manufacturer specifications in accordance with workplace procedures
  • 3.2 Problem-solving techniques are used where corrective actions to assembled components are required in accordance with regulatory requirements and industry standards
  • 3.3 Work completion is documented and relevant person/s notified in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WC381 UEENEEA110A Assemble, mount and connect control gear and switchgear Unit of competency