Unit of competency Outline

Date retreived
22/07/2026 6:58 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Clip veneer

Clip veneer

Unit of competency
National Code
FWPWPP3207
State Code
AXJ35
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
13/05/2016
View on TGA
State Implementation and Classification
Approved Date
05/10/2016
Field of Education
030111 - Wood MacHining And Turning
Original Release Date
05/10/2016
Nominal Hours
10
Description
This unit of competency describes the outcomes required to clip veneer to form a straight edge, remove defects, splits or uneven edges and to sort in readiness for matching and bonding to panel products.The unit applies to production operators and technicians who clip veneer in a forest and wood products factory setting.No licensing, legislative, regulatory, or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for veneer clipping
  • 1.1 Review work order and where required check with appropriate personnel.
  • 1.2 Select appropriate personal protective equipment and check for operational effectiveness.
  • 1.3 Obtain type and quantity of veneer to be clipped from veneer production process.
  • 1.4 Select clipping process in line with work order.
2. Clip veneer
  • 2.1 Use equipment in line with organisational safety procedures, manufacturer’s instructions and environmental protection practices.
  • 2.2 Complete pre-start up equipment checks to ensure operational effectiveness.
  • 2.3 Set clipping machine functions for optimal product recovery.
  • 2.4 Select clipping pattern to match veneer type.
  • 2.5 Clip veneer to specification and assess sheets visually throughout clipping process for dimension, edge and other defects.
  • 2.6 Clip sheets to size, removing unwanted sections and providing clean edges.
3. Sort and redistribute veneer
  • 3.1 Grade clipped veneer and classify into colour and match groupings in line with industry standards.
  • 3.2 Direct material to storage or processing operations in line with organisational procedures.
  • 3.3 Dispose of incorrect cuts, off cuts and defective material in line with environmental protection practices.
  • 3.4 Clean work area in line with organisational safety procedures.
  • 3.5 Record and report production outcomes and equipment faults to appropriate personnel.
No information
No information
Replaces
State Code National Code Title Type
D6122 FPIWPP3207B Clip veneer Unit of competency
State Code National Code Title Type
BAL3 FWP30416 Certificate III in Wood Panel Products Qualification