Unit of competency Outline

Date retreived
22/07/2026 7:58 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Conduct roller operations

Conduct roller operations

Unit of competency
National Code
RIIMPO317E
State Code
AWB59
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
14/12/2015
View on TGA
State Implementation and Classification
Approved Date
14/07/2016
Field of Education
030717 - Plant And Machine Operations
Original Release Date
14/07/2016
Nominal Hours
20
Description
This unit describes a participant’s skills and knowledge required to conduct roller operations in Civil construction.This unit is appropriate for those working in operational roles.Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and industry sectors. Relevant information must be sourced prior to application of the unit.
Notes
Elements and Performance Criteria
1. Plan and prepare roller operations
  • 1.1 Access, interpret and apply roller operations documentation and ensure the work activity is compliant
  • 1.2 Obtain, read, interpret, clarify and confirm work requirements
  • 1.3 Identify and address risks, hazards and environmental issues and implement control measures
  • 1.4 Select and wear personal protective equipment appropriate for work activities
  • 1.5 Identify, obtain and implement traffic management signage requirements
  • 1.6 Select, and check for faults, equipment and/or attachments for work activities
  • 1.7 Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency
2. Operate roller
  • 2.1 Carry out pre-start, start-up, park, shutdown and secure equipment procedures
  • 2.2 Coordinate activities with others at the site prior to commencement of, and during, the work activity
  • 2.3 Continually monitor hazards and risks, and ensure safety of self, other personnel, plant and equipment
  • 2.4 Drive and operate roller, and modify the operating technique to meet changing work conditions
  • 2.5 Complete work plan within the operating capacity of the equipment
  • 2.6 Adjust interchangeable drums, and/or spray bars, and/or scraper bars, and/or wheel/drum brooms and/or drag brooms and/or blades for operational effectiveness and efficiency
  • 2.7 Engage and disengage the compacting device
  • 2.8 Identify, remove or manage contaminants
  • 2.9 Act on or report monitoring systems and alarms
3. Prepare to relocate the roller
  • 3.1 Prepare the roller for relocation
  • 3.2 Move the machine safely within and/or between work areas, observing relevant codes and traffic management requirements
  • 3.3 Load and unload machine from float/trailer
4. Carry out machine operator maintenance
  • 4.1 Prepare machine for maintenance
  • 4.2 Conduct inspection and fault finding
  • 4.3 Carry out scheduled maintenance tasks
  • 4.4 Return machine to service
  • 4.5 Process written maintenance records
5. Conduct housekeeping activities
  • 5.1 Clear work area and dispose of or recycle materials
  • 5.2 Process records
No information
No information
Replaces
State Code National Code Title Type
WH422 RIIMPO317D Conduct roller operations Unit of competency
Replaced By
State Code National Code Title Type
OAK58 RIIMPO317F Conduct roller operations Unit of competency