Unit of competency Outline

Date retreived
23/07/2026 9:23 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Handle reagents

Handle reagents

Unit of competency
National Code
RIIPGP202D
State Code
WH572
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
07/12/2014
View on TGA
State Implementation and Classification
Approved Date
28/05/2014
Field of Education
061301 - Occupational Health And Safety
Original Release Date
28/05/2014
Nominal Hours
30
Description
This unit describes a participant’s skills and knowledge required to handle reagents in Metalliferous Mining.This unit is appropriate for those working in operational roles.Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and Industry sectors. Relevant information must be sourced prior to application of the unit.
Notes
Elements and Performance Criteria
1. Plan and prepare for reagents handling
  • 1.1. Access, interpret and apply reagents handling documentation and ensure the work activity is compliant
  • 1.2. Obtain, read, interpret, clarify and confirm work instructions
  • 1.3. Select, and check for faults, equipment/tools for work activities
  • 1.4. Select and wear personal protective equipment appropriate for the activity
  • 1.5. Identify and address potential risks, hazards and environmental issues, and implement control measures
  • 1.6. Obtain and interpret emergency procedures, and be prepared for fire/accident/ emergency
  • 1.7. Communicate with other personnel using approved communication methods
  • 1.8. Select appropriate type of auxiliary equipment for work activities
  • 1.9. Perform equipment pre-start checks
  • 1.10. Select appropriate reagents
  • 1.11. Use approved fume suppression and extraction methods
2. Start-up equipment in sequence
  • 2.1. Carry out start-up procedures and complete start-up checks according to plant configurations and system requirements
  • 2.2. Confirm plant is operational
3. Mix reagents
  • 3.1. Safely mix reagents to required parameters
  • 3.2. Continuously inspect plant and identify defects and potential problems
4. Add reagents
  • 4.1. Add reagent according to specified dosage and recommended location
  • 4.2. Complete all required written documentation clearly, concisely and on time
5. Transfer and store reagents
  • 5.1 Transfer reagents
  • 5.2. Store reagents in approved storage facility
  • 5.3. Confirm sufficient quantities of reagents are maintained
6. Shutdown in sequence and/or isolate equipment
  • 6.1. Shutdown or isolate equipment in sequence
  • 6.2. Perform post shutdown or isolation checks
  • 6.3. Communicate end of shift information verbally or in writing to oncoming shift
7. Conduct housekeeping activities
  • 7.1. Clean and check tools and equipment
  • 7.2. Maintain and store tools and equipment
No information
No information
Replaces
State Code National Code Title Type
WB371 RIIPGP202A Handle reagents Unit of competency