Unit of competency Outline

Date retreived
22/07/2026 3:30 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Set out and cut letters in stone

Set out and cut letters in stone

Unit of competency
National Code
CPCCST3010
State Code
OCP47
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
24/12/2024
View on TGA
State Implementation and Classification
Approved Date
01/06/2021
Field of Education
040309 - Bricklaying And Stonemasonry
Original Release Date
01/06/2021
Nominal Hours
28
Description
This unit specifies the skills and knowledge required to set out and cut letters in stone. It includes accurately transferring and cutting types of lettering onto various stone faces.This unit applies to stonemasons who work independently, in a team or under supervision and cut letters into hard and soft stone in a workshop setting, on a new or existing structure.A person working at this level would be expected to take responsibility for organising and completing tasks assigned to them without needing close supervision.Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001Prepare to work safely in the construction industrymeets this requirement. No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Plan and prepare.
  • 1.1 Read, interpret and apply requirements for setting out and cutting letters in stone from job requirements, specifications, standards and codes.
  • 1.2 Follow relevant information from workplace procedures, workplace safety and environmental documentation.
  • 1.3 Determine job priorities and sequence job tasks in consultation with others.
  • 1.4 Identify potential hazards and determine and implement control measures.
  • 1.5 Select and check condition of plant, equipment and tools and report damage or faults to relevant person.
  • 1.6 Check conformity of materials against job requirements.
2 Select stone.
  • 2.1 Select, fit correctly and use personal protective equipment (PPE) appropriate for job.
  • 2.2 Select stone to ensure quality, grain, colouring and size to suit job specifications.
  • 2.3 Prepare stone surface for lettering adaptable with the type of stone.
3 Set out for lettering.
  • 3.1 Select fonts appropriate for cemetery monument, architectural settings and a variety of commercial settings.
  • 3.2 Use drafting skills to set out full size lettering and transfer to template or stencil.
  • 3.3 Transfer lettering to stone face using appropriate method.
4 Cut and form traditional and contemporary letters in stone.
  • 4.1 Cut and form raised and flush letters to set out design.
  • 4.2 Cut and form V-shaped letters to set out design.
  • 4.3 Cut and form decorative ornamental work in letters following set out design shapes.
5 Cut and form innovative forms of lettering in stone.
  • 5.1 Develop, draft and set out innovative design and apply techniques for working letters into stone.
  • 5.2 Transfer drafted design to stone face using appropriate method.
  • 5.3 Cut and form designed letter style and shape in stone.
  • 5.4 Clean stone finish to job requirements.
6 Clean up.
  • 6.1 Clear the work area, and dispose of, reuse or recycle materials following workplace and environmental requirements.
  • 6.2 Clean tools and equipment, check for serviceability and report damage or faults.
  • 6.3 Store and secure tools and equipment following workplace procedures.
No information
No information
Replaces
State Code National Code Title Type
W9565 CPCCST3010A Set out and cut letters in stone Unit of competency
State Code National Code Title Type
BGE7 CPC32320 Certificate III in Stonemasonry Qualification