Unit of competency Outline
Date retreived
22/07/2026 6:11 AM AWST
22/07/2026 6:11 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Fabricate aircraft electrical looms and harnesses
Fabricate aircraft electrical looms and harnesses
Unit of competency
National Code
MEA239
MEA239
State Code
AUG01
AUG01
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
22/07/2015
Field of Education
031503 - Aircraft Maintenance Engineering
Original Release Date
22/07/2015
Nominal Hours
40
Description
This unit of competency requires application of hand skills and maintenance publications in aircraft hangars and workshops to fabricate aircraft electrical looms and harnesses under qualified person guidance for general use in electrical systems during scheduled or unscheduled maintenance. Work may be performed individually or as part of a team.The unit is part of the Avionic Certificate II training pathway. The unit is used in workplaces that operate under the airworthiness regulatory systems of the Australian Defence Force (ADF) and the Civil Aviation Safety Authority (CASA).
Notes
Elements and Performance Criteria
1. Prepare to fabricate aircraft electrical looms and harnesses
- 1.1 Appropriate materials, tools and equipment are selected and prepared for the particular task in accordance with applicable maintenance documentation, enterprise procedures and under qualified person guidance
- 1.2 Assembly or fabrication jigs, where applicable, are aligned to ensure accurate fabrication of components
2. Fabricate aircraft electrical looms and harnesses
- 2.1 Components or parts are fabricated in accordance with qualified person guidance, applicable maintenance documentation and enterprise procedures while observing all relevant work health and safety (WHS) requirements
3. Perform routine tests on aircraft electrical looms and harnesses
- 3.1 Under qualified person guidance test equipment and/or rigs are used, where applicable, to confirm serviceability of finished components
4. Complete the fabrication process with regard to aircraft electrical looms and harnesses
- 4.1 Fabricated components are tagged, sealed and packaged within specified procedures
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W8379 | MEA239B | Fabricate aircraft electrical looms and harnesses | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| OEG72 | MEAAVI0034 | Fabricate aircraft electrical looms and harnesses | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| AVN9 | MEA20415 | Certificate II in Aeroskills | Qualification |
| BDV9 | MEA20418 | Certificate II in Aeroskills | Qualification |