Unit of competency Outline

Date retreived
23/07/2026 10:02 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Operate multi-axis router

Operate multi-axis router

Unit of competency
National Code
PMBPROD384
State Code
BAI22
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
1.00
Current Release Date
22/06/2016
View on TGA
State Implementation and Classification
Approved Date
05/08/2016
Field of Education
030717 - Plant And Machine Operations
Original Release Date
05/08/2016
Nominal Hours
60
Description
This unit of competency covers the skills and knowledge required to set up and operate multi-axis routers. It applies to any type and application of multi-axis routers, for example: two axis routers used to cut shapes from polymer sheetsthree, four or five axis routers used to trim thermally formed sheet products computer numerically controlled (CNC) routers or similar CNC machining centresmulti-axis routers used to make 3-D moulds moulded, cast or fabricated products requiring multi-axis routing to produce the required final shape.This unit of competency applies to experienced operators who are required to set up programming; select and install tooling, jigs and fixtures; trial and operate the process; make adjustments to remedy faults and non-conformity and solve problems within area of responsibility.This unit of competency applies to an experienced operator demonstrating theoretical and technical knowledge and well developed skills in situations that require some discretion and judgement. The operator may work alone or as a member of a team or group and will work in liaison with other shift team members, team leader and supervisor, as appropriate.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Prepare for work
  • 1.1 Determine job requirements, including design, quality, materials, equipment and quantities, from work instructions
  • 1.2 Apply work health and safety (WHS) requirements, including personal protection needs, throughout the job
  • 1.3 Select material for machining and inspect for appropriate quality
  • 1.4 Determine procedures for minimising waste material
  • 1.5 Identify and apply procedures for maximising energy efficiency throughout the job
2 Set up for machining and processing
  • 2.1 Set program according to job requirements
  • 2.2 Check safety equipment, including emergency stops, gauges, guards and controls
  • 2.3 Set and adjust machining and processing in accordance with job requirements and machining and processing and tool manufacturer instructions
  • 2.4 Check machining and processing, cutting tools and jigs for safe and effective operation
  • 2.5 Conduct trial runs to check machining and processing operation and quality of finished work
  • 2.6 Make final adjustments to programs and equipment according to workplace procedures
3 Operate machining and processing centres
  • 3.1 Operate and monitor machining and processing centres to ensure product quality and output
  • 3.2 Check waste quantities and minimise waste
  • 3.3 Identify problems with the required work and report to appropriate persons
  • 3.4 Identify items that do not meet quality requirements and take action to repair, recycle or discard according to workplace procedures
  • 3.5 Follow any authorised changes in working procedures
4 Clean up work area and maintain equipment
  • 4.1 Collect and store material that can be reused
  • 4.2 Remove waste and scrap according to workplace procedures
  • 4.3 Apply workplace procedures to clean and inspect equipment and work area for serviceable condition
  • 4.4 Complete operator maintenance in accordance with manufacturer specifications and site procedures
  • 4.5 Tag unserviceable tools and equipment and identify faults in accordance with workplace procedures
  • 4.6 Maintain equipment and tooling in accordance with workplace procedures
5 Anticipate and solve problems
  • 5.1 Recognise a problem or a potential problem
  • 5.2 Determine problems needing priority action
  • 5.3 Refer problems outside area of responsibility to appropriate person, with possible causes
  • 5.4 Seek information and assistance as required to solve problems
  • 5.5 Solve problems within area of responsibility
  • 5.6 Follow through items initiated until final resolution has occurred
No information
No information
Replaces
State Code National Code Title Type
W7672 PMBPROD384A Operate multi-axis router Unit of competency
Replaced By
State Code National Code Title Type
ODB02 PMBPROD384E Operate multi-axis router Unit of competency
State Code National Code Title Type
BCT3 PMB30116 Certificate III in Polymer Processing Qualification
BCU0 PMB40116 Certificate IV in Polymer Technology Qualification