Unit of competency Outline

Date retreived
22/07/2026 12:53 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Set up, operate and maintain automated edge banding machines

Set up, operate and maintain automated edge banding machines

Unit of competency
National Code
MSFFM3038
State Code
OEK50
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
08/12/2022
View on TGA
State Implementation and Classification
Approved Date
19/04/2023
Field of Education
030717 - Plant And Machine Operations
Original Release Date
19/04/2023
Nominal Hours
45
Description
This unit describes the skills and knowledge required to set up, operate and maintain edge banding machines which use automated processes to apply and process an edge trim to solid timber or manufactured board.Workers with this competency follow established procedures in timber technology industries, using discretion, judgement and problem solving to identify and resolve routine product and machine issues.No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Prepare for task
  • 1.1 Determine task requirements and edging specifications from work documentation
  • 1.2 Identify and follow work health and safety requirements
  • 1.3 Select material for machining and check it meets task quality requirements
  • 1.4 Check that cutting tools and other required tools and equipment are available, safe and functional
  • 1.5 Identify procedures for waste minimisation and energy efficiency while completing task
2. Set up machines
  • 2.1 Check that emergency stops, gauges, guards, controls and safety equipment are functional prior to machine start-up
  • 2.2 Complete machine settings and adjust to meet task requirements in compliance with manufacturer instructions
  • 2.3 Complete trial runs to check that machine is fully functional and that finished work meets task accuracy and quality requirements
  • 2.4 Identify and make necessary adjustments to machine settings to meet task quality and efficiency requirements
3. Operate machines
  • 3.1 Follow machine start-up procedures in accordance with manufacturer instructions
  • 3.2 Position material to be machined in accordance with manufacturer instructions, tooling requirements, and safe handling and workplace procedures
  • 3.3 Operate machine in accordance with its designed capacity and purpose, and to manufacturer recommendations
  • 3.4 Monitor machine operation to ensure product quality and output
  • 3.5 Check waste quantities and make adjustments to minimise waste
  • 3.6 Identify items that do not meet quality requirements and recycle or discard in accordance with workplace procedures
  • 3.7 Recognise problems with product or machine operation and resolve or report to appropriate persons in accordance with workplace procedures
4. Finalise task
  • 4.1 Clean work area, safely dispose of waste and identify items for recycling in accordance with workplace procedures and environmental standards
  • 4.2 Clean machinery, complete routine maintenance and leave in safe mode in accordance with workplace procedures
  • 4.3 Identify, tag and report faulty equipment in accordance with workplace procedures
  • 4.4 Complete task documentation in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WI440 MSFFM3019 Set up, operate and maintain automated edge banding machines Unit of competency
State Code National Code Title Type
BIK0 MSF30322 Certificate III in Cabinet Making and Timber Technology Qualification