Unit of competency Outline

Date retreived
22/07/2026 5:23 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Perform minor repairs to earthmoving and off-the-road tyres

Perform minor repairs to earthmoving and off-the-road tyres

Unit of competency
National Code
AURKTJ003
State Code
WI785
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
3.00
Current Release Date
16/01/2015
View on TGA
State Implementation and Classification
Approved Date
01/07/2014
Field of Education
030503 - Vehicle Mechanics
Original Release Date
01/07/2014
Nominal Hours
20
Description
This unit describes the performance outcomes required to inspect and perform minor repairs to earthmoving and off-the-road (OTR) tyres.It applies to those who fit earthmoving and OTR tyres, wheel and rim assemblies of not less than 600 mm (24 inches) nominal diameter.Licensing, legislative, regulatory or certification requirements may apply to this unit in some jurisdictions. Users are advised to check with the relevant regulatory authority.
Notes
Elements and Performance Criteria
1. Prepare for inspection of tyre
  • 1.1 Australian standards for earthmoving and OTR tyres, workplace procedures and safety information are identified and interpreted
  • 1.2 Site and task hazards are identified and control measures determined
  • 1.3 Initial workplace documentation for tyre inspection is completed
  • 1.4 Tyre is prepared and cleaned for inspection
  • 1.5 Tyre is positioned and secured for inspection
2. Inspect tyre
  • 2.1 Extent and nature of internal and external tyre damage are identified
  • 2.2 Damage is categorised in line with Australian standards
  • 2.3 Repairable and non-repairable damage and extent of repairs are identified
  • 2.4 Overall repairability of tyre is determined
3. Carry out minor repair
  • 3.1 Information on appropriate manufacturer instructions and Australian standards is accessed and interpreted
  • 3.2 Task hazards and risks are identified, and risk controls are applied to equipment to be used
  • 3.3 Minor repair to tyre is carried out according to workplace procedures, manufacturer instructions and Australian standards
4. Complete work processes
  • 4.1 Workplace documentation relating to tyre repair is completed
  • 4.2 Inspection documentation is completed according to Australian standards
  • 4.3 Tyre is stored according to workplace procedures
  • 4.4 Work area is cleared and waste materials disposed of, reused or recycled according to workplace procedures
No information
No information
Replaced By
State Code National Code Title Type
OAK09 AURKTJ013 Perform minor repairs to earthmoving and off-the-road tyres Unit of competency