Unit of competency Outline

Date retreived
22/07/2026 1:13 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Cut mat boards

Cut mat boards

Unit of competency
National Code
MSFPF2012
State Code
OAI44
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
03/12/2018
View on TGA
State Implementation and Classification
Approved Date
22/05/2019
Field of Education
030199 - Manufacturing Engineering And Technology, N.e.c.
Original Release Date
22/05/2019
Nominal Hours
35
Description
This unit describes the skills and knowledge required to cut simple mat boards by hand and machine for the mounting of artwork.This unit applies to picture framers cutting mat board in accordance with pre-determined frame designs. No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Prepare for cutting
  • 1.1 Read work order and identify cutting requirements
  • 1.2 Identify and follow work health and safety requirements throughout the work
  • 1.3 Select and check tools and equipment for suitability, quality, serviceability and safety prior to use
  • 1.4 Select mat cutting machines and blades suited to the required cut and adjust for angled, circular or oval cuts
  • 1.5 Set cutting equipment components, controls and clamping systems
  • 1.6 Select, accurately measure and lay out board material in accordance with work requirements and to minimise waste
  • 1.7 Plan the work sequence suited to the job
2. Conduct cutting operation
  • 2.1 Place and clamp mat board on machine
  • 2.2 Inspect cut board for compliance with quality and work order requirements and rectify any deficiencies
  • 2.3 Achieve required cut quality, output and wastage within allowable limits through correct operation of cutting equipment
  • 2.4 Identify and report problems occurring during work operations to appropriate persons
  • 2.5 Make routine equipment adjustments to achieve required output
3. Complete work
  • 3.1 Mark completed work for identification and store in accordance with workplace procedures
  • 3.2 Identify and store items for recycling in accordance with workplace procedures
  • 3.3 Clean work area and safely dispose of rubbish
  • 3.4 Accurately complete required workplace documentation
  • 3.5 Check, clean and store tools and equipment in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WI584 MSFPF2005 Cut mat boards Unit of competency
WI590 MSFPF3003 Set up and operate computer numerically controlled (CNC) machines for picture framing work Unit of competency
State Code National Code Title Type
J725 MSF20113 Certificate II in Furnishing Qualification
BIJ6 MSF20122 Certificate II in Furnishing Qualification
BED4 MSF30518 Certificate III in Picture Framing Qualification