Unit of competency Outline

Date retreived
23/07/2026 7:31 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Shift forestry logs using trucks

Shift forestry logs using trucks

Unit of competency
National Code
FPICOT3226B
State Code
D5935
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
20/05/2011
View on TGA
State Implementation and Classification
Approved Date
08/06/2011
Field of Education
030717 - Plant And Machine Operations
Original Release Date
08/06/2011
Nominal Hours
40
Description
This unit describes the outcomes required to drive log trucks to a forestry harvesting site, load logs on site, deliver logs to their intended destination, and unload the logs in line with organisational procedures and regulationsCompliance with licensing, legislative, regulatory or certification requirements may be required in various jurisdictionsThis unit replaces FPICOT3226A Shift forestry logs using trucks
Notes
Elements and Performance Criteria
1. Plan log movement
  • 1.1. Applicable occupational health and safety (OHS), environmental, legislative and organisational requirements relevant to shifting forestry logs using trucks are identified and followed
  • 1.2. Work order is reviewed and clarified with appropriate personnel
  • 1.3. Type of truck, ancillary equipment, accessories and configuration to be operated are checked for serviceability in line with manufacturer specifications and statutory regulations
  • 1.4. Logging sites and logs to be transported are identified from schedules, work orders and harvesting site personnel
  • 1.5. Truck loads, transport routes and timing with harvesting personnel are planned and permits obtained to follow statutory road regulations and road conditions
  • 1.6. Communication with others is established and maintained in line with OHS requirements
2. Load and unload truck
  • 2.1. Access is identified and manoeuvring approach planned for loading and unloading sites
  • 2.2. Condition of roads and tracks are monitored and unexpected ground, water, vegetation or other environmental conditions are reported to appropriate personnel
  • 2.3. Truck and trailer are positioned to maintain load safety and security while loading occurs
  • 2.4. Logs are assessed for weight, diameter, length and grade
  • 2.5. Log positioning equipment is placed and checked or reset for planned loading
  • 2.6. Log loading is undertaken to ensure load build meets specifications, follows sequence and locations to minimise handling, stabilises the load and meets transport requirements
  • 2.7. Logs are secured with sufficient securing devices to satisfy safety, job and regulatory requirements
  • 2.8. Load is inspected after transport for log movement and logs only supported by binders or chains
  • 2.9. Safe unloading sequence is assessed and provisions are made to support logs that cannot be controlled when released
  • 2.10. Binders and chains are released in correct sequence for truck, trailer and load configuration
3. Transport logs
  • 3.1. Load is checked and trimmed to ensure safe transport with overhang warning devices fitted to follow road regulations
  • 3.2. Engine is started with instruments and gauges monitored to ensure equipment operation is safe, in line with manufacturer specifications and safety rules
  • 3.3. Truck is operated and driven to manufacturer specifications and legislative requirements using primary and subsidiary controls as appropriate to conditions
  • 3.4. Logs are transported following planned or modified route with consideration for road surfaces and conditions
  • 3.5. Periodic load safety checks are conducted and load is re-tensioned in line with statutory requirements and road conditions
  • 3.6. Truck is monitored using gauges, warning devices and observation of performance to detect operating faults
  • 3.7. Log shifting process and truck operations, including faults, are recorded and reported
  • 3.8. Truck is parked to avoid site and equipment hazards, engine is shutdown and truck is secured in line with manufacturer specifications
No information
No information
Replaces
State Code National Code Title Type
S4614 FPICOT3226A Shift forestry logs using trucks Unit of competency
Replaced By
State Code National Code Title Type
WG888 FPICOT3261 Transport forestry logs using trucks Unit of competency
No information