Unit of competency Outline

Date retreived
22/07/2026 7:06 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Conduct annual fire systems inspections

Conduct annual fire systems inspections

Unit of competency
National Code
CPCSFS5014
State Code
OCM33
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
27/11/2020
View on TGA
State Implementation and Classification
Approved Date
01/06/2021
Field of Education
039905 - Fire Technology
Original Release Date
01/06/2021
Nominal Hours
90
Description
This unit of competency specifies the outcomes required to assess all types of fire systems in all types of buildings to ensure that the systems comply with applicable legislation and will perform in the event of a fire.This unit of competency supports the role of annual inspectors of fire systems with responsibility for inspecting existing fire systems; assessing compliance with the relevant applicable legislation, codes and standards; and advising whether they continue to perform to current fire safety standards.In some jurisdictions, this unit of competency may form part of accreditation, licensing, legislative, regulatory or certification requirements.
Notes
Elements and Performance Criteria
1 Prepare for annual fire systems inspections.
  • 1.1 Schedule annual fire systems inspections in a timely manner and in consultation with relevant stakeholders, as required.
  • 1.2 Obtain and review current building plans and identify and note modifications made to the building since the last inspection.
  • 1.3 Review and use information regarding the current and historical legislation, codes and standards and fire engineered solutions applicable to fire systems to inform inspection planning.
  • 1.4 Review and use information regarding the validity of fire systems' compliance documentation to inform inspection planning.
  • 1.5 Plan fire systems certification inspections to ensure efficient and comprehensive implementation.
  • 1.6 Check EPTs for operation in accordance with manufacturers’ specifications and safety requirements for use of EPT.
2 Conduct annual fire systems inspections.
  • 2.1 Inspect and assess each aspect of each fire system for compliance with the applicable current and historical legislation, codes, standards, regulatory requirements and document findings.
  • 2.2 Assess and record the current performance level of each fire system.
  • 2.3 Set-out fasteners adhering to minimum distances for set outfrom edge of substrate material in accordance with requirements.
  • 2.4 Position material, check it is level, and temporarily fix or clamp into designed position in accordance with detailed drawings.
3 Produce annual fire systems inspection reports and communicate findings.
  • 3.1 Analyse the findings of inspections and identify and record works required to address shortfalls in fire systems' compliance or performance according to regulatory requirements.
  • 3.2 Produce and process reports according to regulatory requirements.
  • 3.3 Communicate the findings of the report to relevant stakeholders according to regulatory requirements, and carefully explain works required to rectify fire systems.
  • 3.4 Carry out EPT operation and fix fastener into place in accordance with manufacturers’ specifications and legislative requirements.
  • 3.5 Check depth of fastening penetration and adjust power regulating device in accordance with conditions.
  • 3.6 Carry out misfire procedures in accordance with manufacturers’ specifications and legislative requirements.
  • 3.7 Remove temporary holdings and fixings without damage to material.
4. Maintain EPTs and kit.
  • 4.1 Check safety features of tools for serviceability in accordance with manufacturers’ specifications.
  • 4.2 Clean and lubricate tools in accordance with manufacturers’ specifications.
  • 4.3 Carry out periodic maintenance service in accordance with manufacturers’ specifications.
  • 4.4 Replenish diminished stocks of charges and fasteners to designed effectiveness of EPT kit.
  • 4.5 Check and complete logbook and record maintenance in accordance with manufacturers’ specifications.
5. Secure and store EPT equipment and charges.
  • 5.1 Store used charges in designated container in accordance with requirements.
  • 5.2 Store unused fasteners, the EPT and attachments in a carry case in line with manufacturers’ specifications.
6. Clean up after operating EPTs.
  • 6.1 Clear work area and dispose of, reuse or recycle materials in accordance with legislation, regulations, codes of practice and task requirements.
  • 6.2 Clean, check, maintain and store tools and equipment in accordance with manufacturers’ specifications and workplace requirements.
No information
No information
Replaces
State Code National Code Title Type
WA418 CPCSFS5014A Conduct annual fire systems certification inspections Unit of competency
State Code National Code Title Type
BGE6 CPC50520 Diploma of Fire Systems Design Qualification