Unit of competency Outline

Date retreived
22/07/2026 7:11 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Commission electronics and communications systems

Commission electronics and communications systems

Unit of competency
National Code
UEENEEH067B
State Code
W8015
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
29/07/2011
View on TGA
State Implementation and Classification
Approved Date
10/12/2010
Field of Education
031313 - Electrical Fitting, Electrical Mechanics
Original Release Date
10/12/2010
Nominal Hours
18
Description
1) 1.1) DescriptorThis competency standard unit covers undertaking commissioning procedures of electronics and communications systems to comply with predetermined parameters and delivery to client. It encompasses safe working practices, system parameter testing, analysis and adjusting to assure optimum performance, following procedures, and documenting final operating parameters and settings.
Notes
Elements and Performance Criteria
1 Prepare to commission electronics and communications systems
  • 1.1 OHS procedures for a given work area are obtained and understood.
  • 1.2 Established OHS risk control measures and procedures in preparation for the work are followed.
  • 1.3 Safety hazards that have not previously been identified are noted and established risk control measures are implemented.
  • 1.4 Appropriate personnel are consulted to ensure the work is co-ordinated effectively with others involved on the work site.
  • 1.5 System operating parameters are identified by reviewing system specifications and component technical data.
  • 1.6 Tools, equipment, applications, and testing devices needed for the work are obtained in accordance with established procedures and checked for correct operation and safety.
  • 1.7 Preparatory work is checked to ensure no unnecessary damage has occurred and complies with requirements.
  • 1.8 Circuits are checked as being isolated, where necessary, in strict accordance OHS requirements and procedures.
2 Commission electronics and communications systems.
  • 2.1 OHS risk control measures and procedures for carrying out the work are followed.
  • 2.2 Testing/measuring devices are connected and set up in accordance with requirements for a particular system.
  • 2.3 Measurements and adjustments are made to electronics and communications equipment to provide optimum system performance in accordance with system specifications and/or regulatory requirements.
  • 2.4 Decisions for dealing with unexpected situations are made from discussions with appropriate persons and job specifications and requirements.
  • 2.5 Methods for dealing with unexpected situations are selected on the basis of safety and specified work outcomes.
  • 2.6 Systems' commissioning procedures are performed in accordance with requirements.
  • 2.7 Commissioning is carried out efficiently without unnecessary waste of materials or damage to apparatus, the surrounding environment or services and using sustainable energy principles.
3 Completion and report commissioning activities.
  • 3.1 OHS risk control work completion measures and procedures are followed.
  • 3.2 Adjustment settings are documented in accordance with established procedures.
  • 3.3 Work site is cleaned and made safe in accordance with established procedures.
  • 3.4 Commissioning results and work completion are notified to appropriate person or persons in accordance with established procedures
No information
No information
Replaced By
State Code National Code Title Type
WC593 UEENEEH167A Commission electronics and communications systems Unit of competency